This specification prescribes requirements for the classification of carbon and low-alloy steel flux cored electrodes for flux cored arc welding (FCAW), either with or without shielding gas, and carbon and low-alloy steel metal cored electrodes for gas metal arc welding (GMAW). Carbon and low-alloy flux cored electrodes had previously been classified solely under AWS A5.20/A5.20M, Specification for Carbon Steel Electrodes for Flux Cored Arc Welding, or AWS A5.29/A5.29M, Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding. Carbon and low-alloy steel metal cored electrodes have previously been classified solely under AWS A5.18/A5.18M, Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding, or AWS A5.28/A5.28M, Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding. Iron is the only element of the undiluted weld metal deposited by the electrodes classified under this specification whose content exceeds 10.5%.

This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc welding. The requirements include mechanical properties of weld metal, weld metal soundness, and usability of electrode. Requirements for composition of the weld metal, moisture content of low-hydrogen electrode coverings, standard sizes and lengths, marking, manufacturing, and packaging are all included. A guide to the use of the standard is included in an annex. Optional supplemental requirements include improved toughness and ductility, lower moisture contents, and diffusible hydrogen limits. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

Learn How to Implement Safety Codes and Regulations EffectivelyA number of electrical fatalities and injuries that occur each year can be overcome by a thorough understanding of electrical concepts. Yet due to the complexity of regulatory requirements, many safety professionals may not be fully equipped to handle the task. Electrical Safety: System

This standard specifies the classification and type, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of carbon steel, low alloy steel solid welding wires and filler wires for gas shielded arc welding. This standard is applicable to carbon steel, low-alloy steel solid welding wires and filler wires (hereinafter referred to as welding wires) used for welding such as molten gas shielded arc welding, tungsten gas shielded arc welding and plasma arc welding.