This specification prescribes the requirements for standard sizes and packages of all types of welding filler metals, allowing these physical attributes to be incorporated by reference into the individual specification. The annex lists the manner by which the filler metal specification may refer to appropriate requirements in this specification. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

This specification prescribes the requirements for the classification of brazing filler metals for braze and braze welding. The chemical composition, physical form, and packaging of more than 120 brazing filler metals are specified. The brazing filler metal groups described include aluminum, cobalt, copper, gold, magnesium, nickel, silver, titanium, and brazing filler metals for vacuum service. Information is provided concerning the liquidus, the solidus, the brazing temperature range, and general areas of application recommended for each brazing filler metal. Additional requirements are included for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the brazing filler metals for braze and braze welding. This specification makes use of the International System of Units (SI) and U.S. Customary Units. Since these are not equivalent, each must be used independently of the other.

This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc welding. The requirements include mechanical properties of weld metal, weld metal soundness, and usability of electrode. Requirements for composition of the weld metal, moisture content of low-hydrogen electrode coverings, standard sizes and lengths, marking, manufacturing, and packaging are all included. A guide to the use of the standard is included in an annex. Optional supplemental requirements include improved toughness and ductility, lower moisture contents, and diffusible hydrogen limits. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.