The earlier editions of this title have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited latest edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful, This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources, including e-fuels. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. As CO2 is now an important emission there is also discussion regarding low and non-carbon fuels and how they might be used. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures. (ISBN 9781468605785, ISBN 9781468605792, ISBN 9781468605808, DOI 10.4271/9781468605792)

The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.

This book sheds light on three essential questions: 1. What is the likely supply of gasoline and diesel from oil worldwide to power light vehicles and trucks through 2030-2035? 2. Could any other fuel economically replace gasoline? Will different parts of the world answer that question differently? 3. How will the answers to these questions affect what we engineer, make, and drive in 2030–2035? As difficult as it is to predict timing of these events, the book presents reasonable assumptions and alternative scenarios. Since a switch to alternative technologies will require substantial investment, it is critical to have a sense of when. Despite the global reach of the automotive industry, it is unlikely that a solution for one region will fit all. A more reasonable goal is a set of projected ‘ecosystems’ using differing amounts of oil, electricity, or alternative fuels. From this, automotive managers and leaders can get a sense of how to make business decisions for the future. To frame comparisons, the author qualitatively assesses each alternative against these criteria: 1. energy density 2. scale 3. efficiency of use 4. consumer convenience 5. vehicle technical maturity 6. delivery infrastructure maturity 7. production infrastructure maturity 8. rate of progress Some alternative fuels will naturally be higher in some categories than others. For example, gasoline has higher energy density but when burned in internal combustion engines, has low efficiency. Batteries, on the other hand, have low energy density but are efficient for powering electric motors. For mapping out a long-term future and deciding how best to invest resources, a comparison of these critical criteria should help. The book is concisely written for executives, decision-makers, academics, automotive engineers and others who want or need a long-range view of trends that will influence vehicle fuels for the next 20 years.

Covers the manufacture, storage, distribution, and handling of gasoline and diesel fuel, combustion and volatility, additives, emissions, racing fuels, and alternative fuels, with appendices on fuel chemistry, emissions legislation worldwide, quality specs, and properties of hydrocarbons. This secon

This is volume 63 of the Encyclopaedia of Chemical Processing and Design and includes Viscosity, Heavy Oils to Waste, Hazardous, and Legislation.

Nuclear Energy ebook Collection contains 6 of our best-selling titles, providing the ultimate reference for every nuclear energy engineer's library. Get access to over 3500 pages of reference material, at a fraction of the price of the hard-copy books. This CD contains the complete ebooks of the following 6 titles:Petrangeli, Nuclear Safety, 9780750667234 Murray, Nuclear Energy, 9780750671361 Bayliss, Nuclear Decommissioning, 9780750677448 Suppes, Sustainable Nuclear Power, 9780123706027 Lewis, Fundamentals of Nuclear Reactor Physics, 9780123706317 Kozima, The Science of the Cold Fusion Phenomenon, 9780080451107*Six fully searchable titles on one CD providing instant access to the ULTIMATE library of engineering materials for nuclear energy professionals *3500 pages of practical and theoretical nuclear energy information in one portable package. *Incredible value at a fraction of the cost of the print books