Differing legislation between the countries or unions of countries involved in pollution reduction has turned gas measuring technology into such an extremely extensive and complex field that only a few specialists in environmental agencies and the automobile industry have a grasp of it. This book is intended as an overview of the basics of exhaust gas measuring technology describing the interrelation between emissions, immissions and the effects of pollutants. It aims to provide experts and students alike with an understanding of the interrelationships and details within this field. The results presented are based on the experience gathered by the author during work spanning more than two decades in the automobile industry.

Emissions inspection and maintenance (I/M) programs subject vehicles to periodic inspections of their emission control systems. Despite widespread use of these programs in air-quality management, policy makers and the public have found a number of problems associated with them. Prominent among these issues is the perception that emissions benefits and other impacts of I/M programs have not been evaluated adequately. Evaluating Vehicle Emissions Inspection and Maintenance Programs assesses the effectiveness of these programs for reducing mobile source emissions. In this report, the committee evaluates the differences in the characteristics of motor vehicle emissions in areas with and without I/M programs, identifies criteria and methodologies for their evaluation, and recommends improvements to the programs. Most useful of all, this book will help summarize the observed benefits of these programs and how they can be redirected in the future to increase their effectiveness.

"The combination of scientific and institutional integrity represented by this book is unusual. It should be a model for future endeavors to help quantify environmental risk as a basis for good decisionmaking." â€"William D. Ruckelshaus, from the foreword. This volume, prepared under the auspices of the Health Effects Institute, an independent research organization created and funded jointly by the Environmental Protection Agency and the automobile industry, brings together experts on atmospheric exposure and on the biological effects of toxic substances to examine what is knownâ€"and not knownâ€"about the human health risks of automotive emissions.

Contributions by Surhid Gautam and Lit-Mian Chan. This book presents a state-of-the art review of vehicle emission standards and regulations and provides a synthesis of worldwide experience with vehicle emission control technologies and their applications in both industrial and developing countries. Topics covered include: * The two principal international systems of vehicle emission standards: those of North America and Europe * Test procedures used to verify compliance with emissions standards and to estimate actual emissions * Engine and aftertreatment technologies that have been developed to enable new vehicles to comply with emission standards, as well as the cost and other impacts of these technologies * An evaluation of measures for controlling emissions from in-use vehicles * The role of fuels in reducing vehicle emissions, the benefits that could be gained by reformulating conventional gasoline and diesel fuels, the potential benefits of alternative cleaner fuels, and the prospects for using hydrogen and electric power to run motor vehicles with ultra-low or zero emissions. This book is the first in a series of publications on vehicle-related pollution and control measures prepared by the World Bank in collaboration with the United Nations Environment Programme to underpin the Bank's overall objective of promoting transport that is environmentally sustainable and least damaging to human health and welfare.

This book discusses recent changes in the European legislation for exhaust emissions from motor vehicles. It starts with a comprehensive explanation of both the structure and range of applicability of new regulations, such as Euro 5 and Euro 6 for light-duty vehicles and Euro VI for heavy-duty vehicles. Then it introduces the most important issues in in-service conformity and conformity of production for vehicles, describing the latest procedures for performing exhaust emissions tests under both bench and operating conditions. Subsequently, it reports on portable emission measurement systems (PEMS) and their application for assessing the emissions of gaseous and particulate matter alike, under actual operating conditions and in all transport modes. Lastly, the book presents selected findings from exhaust emissions research on engines for a variety of transport vehicles, such as light-duty and heavy-duty vehicles, as well as non-road vehicles, which include farm tractors, groundwork and forest machinery, diesel locomotives, high-rail vehicles, combat vehicles and special-purpose vehicles. This work offers a valuable reference guide for researchers and professionals dealing with environmental regulations and vehicle manufacturing in the European Union.

Works related to identification of harmful exhaust components from aviation engines have continued since the second half of the last century. These works focus on high-thrust turbine engines. For this, group testing and standardization procedures have been developed containing the admissible limits of exhaust components. Since 2007 works have been underway related to the identification of harmful exhaust components from engines of low power output that have not yet been included in the emissions legislation. These actions are particularly related to the measurements of the exhaust emissions from piston aviation engines and they are focused on the fuel applied for these engines. This book presents the results of the author's own research work related to the issues of exhaust emissions from powertrains of aircraft and helicopters fitted with piston or turbine engines not yet included in the emission legislation. Research has been presented for turbocharged piston and jet engines aircraft. Test procedures have been presented related to the measurement of the exhaust emission under actual conditions of operation. The study presents analyses of the operating conditions of aviation engines, for which data from the on-board recording devices (flight parameters) have been used. Tests have been developed related to the engines operating under actual operating (in-flight) conditions. The methodology of the developed test has been validated based on a test dedicated for an aircraft fitted with a jet engine. The test results have been subject to a comparison with the results of tests applicable in the homologation procedures. Eventually, the authors proposed exhaust emissions tests dedicated to individual aircraft groups.