The standard incandescent light bulb, which still works mainly as Thomas Edison invented it, converts more than 90% of the consumed electricity into heat. Given the availability of newer lighting technologies that convert a greater percentage of electricity into useful light, there is potential to decrease the amount of energy used for lighting in both commercial and residential applications. Although technologies such as compact fluorescent lamps (CFLs) have emerged in the past few decades and will help achieve the goal of increased energy efficiency, solid-state lighting (SSL) stands to play a large role in dramatically decreasing U.S. energy consumption for lighting. Since the publication of the 2013 National Research Council report Assessment of Advanced Solid-State Lighting, the penetration of SSL has increased dramatically, with a resulting savings in energy and costs that were foreshadowed by that study. What was not anticipated then is the dramatic dislocation and restructuring of the SSL marketplace, as cost reductions for light-emitting diode (LED) components reduced profitability for LED manufacturers. At the same time, there has been the emergence of new applications for SSL, which have the potential to create new markets and commercial opportunities for the SSL industry. Assessment of Solid-State Lighting, Phase Two discusses these aspects of changeâ€"highlighting the progress of commercialization and acceptance of SSL and reviewing the technical advances and challenges in achieving higher efficacy for LEDs and organic light-emitting diodes. This report will also discuss the recent trends in SSL manufacturing and opportunities for new applications and describe the role played by the Department of Energy (DOE) Lighting Program in the development of SSL.

The standard incandescent light bulb, which still works mainly as Thomas Edison invented it, converts more than 90% of the consumed electricity into heat. Given the availability of newer lighting technologies that convert a greater percentage of electricity into useful light, there is potential to decrease the amount of energy used for lighting in both commercial and residential applications. Although technologies such as compact fluorescent lamps (CFLs) have emerged in the past few decades and will help achieve the goal of increased energy efficiency, solid-state lighting (SSL) stands to play a large role in dramatically decreasing U.S. energy consumption for lighting. Since the publication of the 2013 National Research Council report Assessment of Advanced Solid-State Lighting, the penetration of SSL has increased dramatically, with a resulting savings in energy and costs that were foreshadowed by that study. What was not anticipated then is the dramatic dislocation and restructuring of the SSL marketplace, as cost reductions for light-emitting diode (LED) components reduced profitability for LED manufacturers. At the same time, there has been the emergence of new applications for SSL, which have the potential to create new markets and commercial opportunities for the SSL industry. Assessment of Solid-State Lighting, Phase Two discusses these aspects of changeâ€"highlighting the progress of commercialization and acceptance of SSL and reviewing the technical advances and challenges in achieving higher efficacy for LEDs and organic light-emitting diodes. This report will also discuss the recent trends in SSL manufacturing and opportunities for new applications and describe the role played by the Department of Energy (DOE) Lighting Program in the development of SSL.

Since its inception in 1977 from an amalgam of federal authorities, the U.S. Department of Energy (DOE) has administered numerous programs aimed at developing applied energy technologies. In recent years, federal oversight of public expenditures has emphasized the integration of performance and budgeting. Notably, the Government Performance and Results Act (GPRA) was passed in 1993 in response to questions about the value and effectiveness of federal programs. GPRA and other mandates have led agencies to develop indicators of program performance and program outcomes. The development of indicators has been watched with keen interest by Congress, which has requested of the National Research Council (NRC) a series of reports using quantitative indicators to evaluate the effectiveness of applied energy research and development (R&D). The first such report took a retrospective view of the first 3 years of DOE R&D programs on fossil energy and energy efficiency. The report found that DOE-sponsored research had netted large commercial successes, such as advanced refrigerator compressors, electronic lighting ballasts, and emission control technology for flue gas desulfurization. However, some programs were judged to be costly failures in which large R&D expenditures did not result in a commercial energy technology. A follow-up NRC committee was assigned the task of adapting the methodology to the assessment of the future payoff of continuing programs. Evaluating the outcome of R&D expenditures requires an analysis of program costs and benefits. Doing so is not a trivial matter. First, the analysis of costs and benefits must reflect the full range of public benefits that are envisioned, accounting for environmental and energy security impacts as well as economic effects. Second, the analysis must consider how likely the research is to succeed and how valuable the research will be if successful. Finally, the analysis must consider what might happen if the government did not support the project: Would some non-DOE entity undertake it or an equivalent activity that would produce some or all of the benefits of government involvement? This second report continues to investigate the development and use of R&D outcome indicators and applies the benefits evaluation methodology to six DOE R&D activities. It provides further definition for the development of indicators for environmental and security benefits and refines the evaluation process based on its experience with the six DOE R&D case studies.

This guide replaces the 1984 publication entitled An Informational Guide for Roadway Lighting. It has been revised and brought up to date to reflect current practices in roadway lighting. The guide provides a general overview of lighting systems from the point of view of the transportation departments and recommends minimum levels of quality. The guide incorporates the illuminance and luminance design methods, but does not include the small target visibility (STV) method.

The contributions in this volume map out how technologies are used and designed to plan, maintain, govern, demolish, and destroy the city. The chapters demonstrate how urban technologies shape, and are shaped, by fundamental concepts and principles such as citizenship, publicness, democracy, and nature. The many authors herein explore how to think of technologically mediated urban space as part of the human condition. The volume will thus contribute to the much-needed discussion on technology-enabled urban futures from the perspective of the philosophy of technology. This perspective also contributes to the discussion and process of making cities ‘smart’ and just. This collection appeals to students, researchers, and professionals within the fields of philosophy of technology, urban planning, and engineering.

This book is open access under a CC BY 4.0 license. We must find new and innovative ways of conceptualizing transboundary energy issues, of embedding concerns of ethics or justice into energy policy, and of operationalizing response to them. This book stems from the emergent gap; the need for comparative approaches to energy justice, and for those that consider ethical traditions that go beyond the classical Western approach. This edited volume unites the fields of energy justice and comparative philosophy to provide an overarching global perspective and approach to applying energy ethics. We contribute to this purpose in four sections: setting the scene, practice, applying theory to practice, and theoretical approaches. Through the chapters featured in the volume, we position the book as one that contributes to energy justice scholarship across borders of nations, borders of ways of thinking and borders of disciplines. The outcome will be of interest to undergraduate and graduate students studying energy justice, ethics and environment, as well as energy scholars, policy makers, and energy analysts.

LEDs are in the midst of revolutionizing the lighting industry Up-to-date and comprehensive coverage of light-emitting materials and devices used in solid state lighting and displays Presents the fundamental principles underlying luminescence Includes inorganic and organic materials and devices LEDs offer high efficiency, long life and mercury free lighting solutions