Reinforced and pre-stressed concrete are widely used for the construction of infrastructures such as bridges, industrial structures, buildings, etc. Most of the time, the quality of the concrete mix is assumed to be guaranteed but due to the congestion of reinforcement and the quality control exercised during placing and vibrating, honeycombs and voids are likely to be present in the hardened concrete. The presence of voids leads to the early deterioration of concrete and corrosion also sets in. The corrosion of reinforcement causes damage to the cover concrete and also section loss in the area of steel. In the case of pre-stressed concrete members, the corrosion leads to a catastrophic failure without any warning. Hence, it becomes necessary to evaluate the condition of concrete using Non Destructive Techniques (NDT) and Partially Destructive Techniques (PDT). The Ultrasonic Pulse Velocity (UPV) method which is widely adopted till now gives the relative quality and integrity of concrete and is based on the transit time. The rebound hammer gives the quality of concrete in the cover zone based on the rebound number.

This report contains nine specific-application cases of various nondestructive test (NDT) methods in fatigue and fracture reliability assessment of structures.

This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.

This book provides an overview and up-to-date synthesis of the most commonly used non-destructive technologies for the reverse engineering of built infrastructure facilities. These technologies tackle both the geometric and radiometric characterization of built structures, and thus, validated technologies such as laser scanning, photogrammetry, and

This book serves as a comprehensive resource on various traditional, advanced and futuristic material technologies for aerospace applications encompassing nearly 20 major areas. Each of the chapters addresses scientific principles behind processing and production, production details, equipment and facilities for industrial production, and finally aerospace application areas of these material technologies. The chapters are authored by pioneers of industrial aerospace material technologies. This book has a well-planned layout in 4 parts. The first part deals with primary metal and material processing, including nano manufacturing. The second part deals with materials characterization and testing methodologies and technologies. The third part addresses structural design. Finally, several advanced material technologies are covered in the fourth part. Some key advanced topics such as “Structural Design by ASIP”, “Damage Mechanics-Based Life Prediction and Extension” and “Principles of Structural Health Monitoring” are dealt with at equal length as the traditional aerospace materials technology topics. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

This book comprises the proceedings of the Conference and Exhibition on Non Destructive Evaluation, (NDE 2019). The contents of the book encompass a vast spectrum from Conventional to Advanced NDE including novel methods, instrumentation, sensors, procedures and data analytics as applied to all industry segments for quality control, periodic maintenance, life estimation, structural integrity and related areas. This book will be a useful reference for students, researchers and practitioners.

Handbook of Materials Failure Analysis: With Case Studies from the Construction Industry provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios including material defects, mechanical failure due to various causes, and improper material selection and/or corrosive environment. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Failure can occur for several reasons, including: materials defects-related failure, materials design-related failure, or corrosion-related failures. The suitability of the materials to work in a definite environment is an important issue. The results of these failures can be catastrophic in the worst case scenarios, causing loss of life. This important reference covers the most common types of materials failure, and provides possible solutions. - Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge and current research on the latest developments and innovations in the field - Offers an ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, and fatigue life prediction - Presents compelling new case studies from key industries to demonstrate concepts and to assist users in avoiding costly errors that could result in catastrophic events