Case Study from the year 2020 in the subject Agrarian Studies, , language: English, abstract: This paper concentrated on assessing and controlling the operational loss of sugar in various sugar byproducts during cane processing in cane sugar factory. In the study, factors associated with operational loss were discussed and Kagera Sugar Limited (KSL) was taken as a case study. Operational sucrose loss is divided into two major categories namely, determined losses and undetermined losses. Determined losses are those which can be easily quantified through lab analysis, such as loss in molasses, filter cake and bagasse. Unlike determined losses, undetermined losses are difficult to estimate directly but rather by factory material balance. Undetermined loss is further classified into chemical loss, mechanical loss and administrative loss. In both losses, the loss through molasses is by far the largest of total loss encountered during cane processing. Objective of this paper was to develop means of increasing sucrose recovery by monitoring sugar loss. After analyzing data collected from KSL production reports, for crushing seasons 2015/16 and 2016/17 the operational loss was 2.83 and 2.87 pol % cane crushed in respective seasons. This means KSL loses significant amount of sucrose as compared to 2.20 pol% cane crushed for plants installed after 1994 as reported by. Sugar loss in molasses and bagasse was high than others, it was concluded that, the use of three laws of sucrose loss in molasses coupled with optimization of boiling house operations would result in minimized loss of sucrose in molasses. Also, improving extraction would result in minimum sucrose loss in bagasse.

An indispensable, practical guide for everyone involved in the processing of sugar cane. Confined to essentials, the book is a compact and concise delineation of the unit processes in the manufacture of raw sugar from sugar cane, giving recommended procedures for achieving optimum results.

In print for over a century, it is the definitive guide to cane sugar processing, treatment and analysis. This edition expands coverage of new developments during the past decade--specialty sugars, plant maintenance, automation, computer control systems and the latest in instrumental analysis for the sugar industry.

Processing techniques of sugar cane into brown or white sugar. Technical and socio - economic analysis of SSSp in developing countries. Utilization of SSSP byproducts.

This book offers a broad understanding of bioethanol production from sugarcane, although a few other substrates, except corn, will also be mentioned. The 10 chapters are grouped in five sections. The Fuel Ethanol Production from Sugarcane in Brazil section consists of two chapters dealing with the first-generation ethanol Brazilian industrial process. The Strategies for Sugarcane Bagasse Pretreatment section deals with emerging physicochemical methods for biomass pretreatment, and the non-conventional biomass source for lignocellulosic ethanol production addresses the potential of weed biomass as alternative feedstock. In the Recent Approaches for Increasing Fermentation Efficiency of Lignocellulosic Ethanol section, potential and research progress using thermophile bacteria and yeasts is presented, taking advantage of microorganisms involved in consolidating or simultaneous hydrolysis and fermentation processes. Finally, the Recent Advances in Ethanol Fermentation section presents the use of cold plasma and hydrostatic pressure to increase ethanol production efficiency. Also in this section the use of metabolic-engineered autotrophic cyanobacteria to produce ethanol from carbon dioxide is mentioned.

Power Generation from Solid Fuels introduces the different technologies to produce heat and power from solid fossil (hard coal, brown coal) and renewable (biomass, waste) fuels, such as combustion and gasification, steam power plants and combined cycles etc. The book discusses technologies with regard to their efficiency, emissions, operational behavior, residues and costs. Besides proven state of the art processes, the focus is on the potential of new technologies currently under development or demonstration. The main motivation of the book is to explain the technical possibilities for reducing CO2 emissions from solid fuels. The strategies which are treated are: more efficient power and heat generation technologies, processes for the utilisation of renewable solid fuels, such as biomass and waste, and technologies for carbon capture and storage. Power Generation from Solid Fuels provides, both to academia and industry, a concise treatment of industrial combustion of all types of solid, hopefully inspiring the next generation of engineers and scientists.

This book discusses the commercialization of biofuels and the Brazilian government policies for the promotion of renewable energy program in Brazil, which could be a learning module for several countries for implementing biofuels policy to improve their socioeconomic status and make them energy independent. Researchers in academia and industries, policy makers, and economic analysts will be assisted by important source of information in their ongoing research and future perspectives. This book will benefit graduate and postgraduate students of chemical and biochemical engineering, forestry, microbiology, biochemistry, biotechnology, applied chemistry, environmental science, sustainable energy, and biotech business disciplines by signifying the applied aspects of bioenergy production from various natural sources and their implications. Graduate and postgraduate students as well as postdoctoral researchers will find clear concepts of feedstock analysis, feedstock degradation, microbial fermentation, genetic engineering, renewable energy generation and storage, climate changes, and techno-economic analysis of biofuels production technologies.