Bad experiences with construction quality, the energy crises of 1973 and 1979,complaints about `sick buildings?, thermal, acoustical, visual and olfactory discomfort, the need for good air quality, the move towards more sustainability ? all these have accelerated the development of a field that, for a long time, was hardly more than an academic exercise: building physics. The discipline embraces domains such as heat and mass transfer, building acoustics, lighting, indoor environmental quality and energy efficiency. In some countries, fire safety is also included. Through the application of physical knowledge and its combination with information coming from other disciplines, the field helps to understand the physical phenomena governing building parts, building envelope, whole building and built environment performance, although for the last the wording `urban physics? is used. Building physics has a real impact on performance-based building design. This volume on `Applied Building Physics? discusses the heat, air and moisture performance metrics that affect building design, construction and retrofitting.

Die Energiekrise der 1970er Jahre, häufig auftretende Feuchteprobleme, Klagen über das Sick-Building-Syndrom und mangelnden Komfort hinsichtlich Raumklima und Behaglichkeit und nicht zuletzt das Bemühen um Nachhaltigkeit haben die Bauphysik zu einem Innovationsmotor auf dem Gebäudesektor gemacht. Dabei war die gesellschaftliche Forderung nach Energieeinsparung in Gebäuden ohne Gebrauchseinschränkungen der Auslöser für die ganzheitliche Planung. Wie alle Ingenieurwissenschaften ist auch die Bauphysik anwendungsorientiert, weshalb sich nach einem ersten Buch über die Grundlagen das vorliegende zweite Buch mit den Hintergründen der Gebrauchstauglichkeit und den Anforderungen an Energieeffizienz in Gebäuden befasst. Außenklimabedingungen und Raumklimaberechnungen werden diskutiert, Energieverluste und -gewinne werden für Gebäude und separat für die Gebäudehülle untersucht. Die wichtigen physikalischen Eigenschaften für den gekoppelten Wärme- und Feuchtetransport durch Baukonstruktionen werden für zahlreiche Materialien aufgeführt. Für das Buch stützt sich der Autor auf seine Erfahrungen aus 35 Jahren Lehre der Bauphysik für Architekten und Bauingenieure und 40 Jahre Tätigkeit in der Forschung und als Beratender Ingenieur.

The energy transition is one of the key approaches in the effort to halt climate changes, and it has become even more essential in the light of the recent COVID-19 pandemic. Fostering the energy efficiency and the energy independence of the building sector is a focal aim to move towards a decarbonized society. In this context, building physics and building energy systems are fundamental disciplines based on applied physics applications in civil, architectural, and environmental engineering, including technical themes related to the planning of energy and the environment, diagnostic methods, and mitigating techniques. This Special Issue contains information on experimental studies in the following research topics: renewable energy sources, building energy analysis, rational use of energy, heat transmission, heating and cooling systems, thermofluid dynamics, smart energy systems, and energy service management in buildings.

Note: New editions of this book have been published: the 2nd edition in 2012, the 3rd edition in 2017, and the 4th edition in September 2023. Bad experiences with construction quality, the energy crises of 1973 and 1979, complaints about 'sick buildings', thermal, acoustical, visual and olfactory discomfort, the move towards more sustainability, have all accelerated the development of a field, which until 35 years ago was hardly more than an academic exercise: building physics. Through the application of existing physical knowledge and the combination with information coming from other disciplines, the field helps to understand the physical performance of building parts, buildings and the built environment, and translates it into correct design and construction. This book is the result of thirty years teaching, research and consultancy activity of the author. The book discusses the theory behind the heat and mass transport in and through building components. Steady and non steady state heat conduction, heat convection and thermal radiation are discussed in depth, followed by typical building-related thermal concepts such as reference temperatures, surface film coefficients, the thermal transmissivity, the solar transmissivity, thermal bridging and the periodic thermal properties. Water vapour and water vapour flow and moisture flow in and through building materials and building components is analyzed in depth, mixed up with several engineering concepts which allow a first order analysis of phenomena such as the vapour balance, the mold, mildew and dust mites risk, surface condensation, sorption, capillary suction, rain absorption and drying. In a last section, heat and mass transfer are combined into one overall model staying closest to the real hygrothermal response of building components, as observed in field experiments. The book combines the theory of heat and mass transfer with typical building engineering applications. The line from theory to application is dressed in a correct and clear way. In the theory, oversimplification is avoided. This book is the result of thirty years teaching, research and consultancy activity of the author.

This book offers a comprehensive presentation of the most important phenomena in building physics: heat transfer, moisture/humidity, sound/acoustics and illumination. As the book is primarily aimed at engineers, it addresses technical issues with the necessary pragmatism and incorporates many practical examples and related international standards. In order to ensure a complete understanding, it also explains the underlying physical principles and relates them to practical aspects in a simple and clear manner. The relationships between the various phenomena of building physics are clarified through consistent cross-referencing of formulas and ideas. The second edition features both new and revised sections on topics such as energy balance, solar gain, ventilation, road traffic and daylighting and takes into account new developments in international standards. It newly features almost 200 illustrations and 21 videos worth of supplementary material. The book is primarily aimed at students of civil engineering and architecture, as well as scientists and practitioners in these fields who wish to deepen or broaden their knowledge of topics within building physics.

In the climate-controlled buildings of today, moisture problemsaffect not only the useable life expectancy of the structure, butthe comfort and health of the occupants. This reference is thefirst to apply up-to-date moisture control and treatment techniquesin a problem/solution format. Opening with an introductoryexplanation of the nature and causes of mold, mildew, andcondensation, the book gives specific advice on heated, cooled, andcombination environments, plus a short course in the dynamics ofmoisture movement within buildings. Other invaluable coverageincludes: * clear, detailed recommended practices for all United Statesclimates * practices for cooling as well as heating climates (often, heatingclimate solutions are applied in cooling climates, where problemsand solutions are completely different) * an overall, systematic view of moisture problems--including howmechanical systems and occupant lifestyles can create and alsoresolve moisture problems * actual case studies of buildings with moisture problems thatillustrate the principles and practices presented in the book This detailed, no-nonsense exploration of moisture cause andeffect--as well as its protection and remediation--will expandreaders' knowledge on this crucial subject. Moisture ControlHandbook will be welcomed by building contractors, architects,mechanical engineers, building science researchers, buildingproduct manufacturers, homeowners, and small commercial buildingowners.

This text explores the formation of clouds, ice crystals, and hail. It also reviews techniques for cloud modifications, artificial stimulation of rainfall, and modification of hailstorms. 26 figures. 16 halftones.