This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and automotive engineering. The book is divided into three main parts: fundamentals, mechanical properties and applications. Part one focuses on the basic properties of adhesives, surface assessment and treatment. Part two concentrates on understanding how adhesives perform under stress and the factors affecting fatigue and failure. The final part of the book reviews industry specific applications in areas such as building and construction, transport and electrical engineering.With its distinguished editor and international team of contributors, Adhesive bonding is a standard reference for all those concerned with the industrial application of adhesives. - Essential information for all those concerned with the industrial application of adhesives - This important collection examines adhesives and adhesive bonding for load-bearing applications - Arranged in a user-friendly format with three main sections: fundamentals, generic uses and industry specific applications

This book brings together scientists and provides the reader with a comprehensive overview of some recent developments in the field of adhesive bonding with the contributions of internationally recognized authors. This book is divided into three sections: "Structural Adhesive Bonding," "Wood Adhesive Bonding," and "Adhesive Bonding in Medical Applications." Each section presents an important review and some applications of the adhesive bonding in various different disciplines. I hope that the book published in open access will help researchers to benefit from it.

Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion

Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. - Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques - Includes a thorough survey of recent advances in research in surface treatments of metals and polymers - Provides technical advice on experimental testing methods throughout the book

This book describes, in clear, understandable language, the three main disciplines of adhesion technology:

Both solid knowledge of the basics as well as expert knowledge is needed to create rigid, long-lasting and material-specific adhesions in the industrial or trade sectors. Information that is extremely difficult and time-consuming to find in the current literature. Written by specialists in various disciplines from both academia and industry, this handbook is the very first to provide such comprehensive knowledge in a compact and well-structured form. Alongside such traditional fields as the properties, chemistry and characteristic behavior of adhesives and adhesive joints, it also treats in detail current practical questions and the manifold applications for adhesives.

Approx.512 pagesApprox.512 pages