Data fusion is a rapidly developing technology which involves the combination of information supplied by several NDT (Non-Destructive Testing) sensors to provide a more complete and understandable picture of structural integrity. This text is the first to be devoted exclusively to the concept of multisensor integration and data fusion applied to NDT. The advantages of this methodology are widely acknowledged and the author presents an excellent introduction to data fusion processes. Problems are approached progressively through detailed case studies, offering practical guidance for those wishing to develop and explore NDT data fusion further. This book will prove invaluable to inspectors, students and researchers concerned with NDT signal processing measurements and testing. It shows the great value and major benefits which can be achieved by implementing multisensor data fusion, not only in NDT but also in any discipline where measurements and testing are key activities.

Non-destructive testing (NDT) systems can generate incomplete, incorrect or conflicting information about a flaw or a defect. Therefore, the use of more than one NDT system is usually required for accurate defect detection and/or quantification. In addition to a reduction in inspection time, important cost savings could be achieved if a data fusion process is developed to combine signals from multisensor systems for manual and remotely operated inspections. This gathering of data from multiple sources and an efficient processing of information help in decision making, reduce signal uncertainty and increase the overall performance of a non-destructive examination. This book gathers, for the first time, essays from leading NDT experts involved in data fusion. It explores the concept of data fusion by providing a comprehensive review and analysis of the applications of NDT data fusion. This publication concentrates on NDT data fusion for industrial applications and highlights progress and applications in the field of data fusion in areas ranging from materials testing in the aerospace industry to medical applications. Each chapter contains a specific case study with a theoretical part but also presents experimental results from a practical point of view. The book should be considered more as a pragmatic introduction to the applications of NDT data fusion rather than a rigorous basis for theoretical studies.

Non-destructive testing (NDT) systems can generate incomplete, incorrect or conflicting information about a flaw or a defect. Therefore, the use of more than one NDT system is usually required for accurate defect detection and/or quantification. In addition to a reduction in inspection time, important cost savings could be achieved if a data fusion process is developed to combine signals from multisensor systems for manual and remotely operated inspections. This gathering of data from multiple sources and an efficient processing of information help in decision making, reduce signal uncertainty and increase the overall performance of a non-destructive examination. This book gathers, for the first time, essays from leading NDT experts involved in data fusion. It explores the concept of data fusion by providing a comprehensive review and analysis of the applications of NDT data fusion. This publication concentrates on NDT data fusion for industrial applications and highlights progress and applications in the field of data fusion in areas ranging from materials testing in the aerospace industry to medical applications. Each chapter contains a specific case study with a theoretical part but also presents experimental results from a practical point of view. The book should be considered more as a pragmatic introduction to the applications of NDT data fusion rather than a rigorous basis for theoretical studies.

Since the publication of the first edition of this book, advances in algorithms, logic and software tools have transformed the field of data fusion. The latest edition covers these areas as well as smart agents, human computer interaction, cognitive aides to analysis and data system fusion control. data fusion system, this book guides you through the process of determining the trade-offs among competing data fusion algorithms, selecting commercial off-the-shelf (COTS) tools, and understanding when data fusion improves systems processing. Completely new chapters in this second edition explain data fusion system control, DARPA's recently developed TRIP model, and the latest applications of data fusion in data warehousing and medical equipment, as well as defence systems.

Comprehensive guide to the basic principles and applications of non-destructive testing methods for aircraft system and components: airframe, propulsion, landing gear and more Provides detailed analysis of the advantages and disadvantages of major NDT methods Important for design, inspection, maintenance, repair, corrosion protection and safety This critical book is among the first to provide a detailed assessment of non-destructive testing methods for the many materials and thousands of parts in aircraft. It describes a wide variety of NDT techniques and explains their application in the evaluation and inspection of aerospace materials and components ranging from the entire airframe to systems and subsystems. At the same time the book offers guidance on the information derived from each NDT method and its relation to aircraft design, repair, maintenance and overall safety. The book covers basic principles, as well as practical details of instrumentation, procedures and operational results with a full discussion of each method's capabilities and limitations as these pertain to aircraft inspection and different types of materials, e.g., composites and metal alloys. Technologies covered include: optical and enhanced optical methods; liquid penetrant, replication and magnetic particle inspection; electromagnetic and eddy current approaches; acoustics and ultrasonic techniques; infrared thermal imaging; and radiographic methods. A final section is devoted to NDT reliability and ways the probability of detection can be measured to establish inspection intervals.

Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.

In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has expanded into a set of six books carefully focused on a specialized area or field of study. Each book represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Each article includes defining terms, references, and sources of further information. Encompassing the work of the world’s foremost experts in their respective specialties, Sensors, Nanoscience, Biomedical Engineering, and Instruments features the latest developments, the broadest scope of coverage, and new material on multisensor data fusion and MEMS and NEMS.