Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.

A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and non-cracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification 'Design of fastenings for use in concrete' and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B.

Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.

Prepared by theØTask Committee on Wind-Induced Forces and Task Committee on Anchor Bolt Design of the Petrochemical Committee of the Energy Division of ASCE. This report presents state-of-the-practice set of guidelines for the determination of wind-induced forces and the design of anchor bolts for petrochemical facilities. Current codes and standards do not address many of the structures found in the petrochemical industry. As a result, engineers and petrochemical companies have independently developed procedures and techniques for handling engineering issues such as the twoØcontained in this report. A lack of standardization in the industry has led to inconsistent structural reliability, however. This volume is intended for structural design engineers familiar with design of industrial-type structures.

Summary: This guide presents worked examples using the design provisions in ACI 318 Appendix D. Not all conditions are covered in these examples.The essentials of direct tension, direct shear, combined tension and shear, and the common situation of eccentric shear, as in a bracket or corbel, and presented.