The EPA has established regulations which classify four types of disinfection byproducts - TTHMs, haloacetic acids, bromate, and chlorite - and requires public water systems limit these byproducts to specific levels. Most of the information required to comply with these standards is either scattered throughout the literature or derived from confere

Covering the latest developments in themes related to water disinfection by-products, this book brings the academic and industry researchers right up to date.

Drinking water disinfection has markedly reduced diseases causes by waterborne pathogenic microorganisms. However, an unintended consequence of disinfection and/or oxidation processes is the generation of disinfection byproducts (DBPs) which are formed from the reactions of disinfectants/oxidants with water matrix components. This volume of the Comprehensive Analytical Chemistry Handbook presents recent advances about the formation, identification, and quantification of inorganic and organic DBPs during oxidative processes. The book begins with a first chapter reviewing the most recent non-targeted screening approaches and workflows to characterize DBPs using low-, high-, and ultra-high-resolution mass spectrometry. The second chapter discusses the analysis of inorganic chloramines in waters using on-site and/or in-lab analytical methods. The third chapter provides an overview of the current knowledge about the mechanisms of chlorine dioxide reactions and byproducts formation. The fourth chapter presents some fundamental and practical aspects about ozonation processes in water treatment and provides an overview about ozone reaction mechanisms and byproducts formation. The fifth chapter focuses on the reactivity of halide ions, particularly bromide and iodide, with common oxidants and the role they play in determining the speciation of DBPs in treated waters. The chapter also presents strategies to mitigate the formation of DBPs during oxidation processes. Finally, the last chapter tackles the topic of DBPs formation during potable water reuse. It discusses the formation of DBPs of major concern in both memebrane-based and non-membrane-based potable water reuse treatment schemes.Researchers, water treatment specialists, and regulators will find in this book a valuable and compact resource on several key topics regarding the formation, identification, quantification, and mitigation of DBPs. - Identification and quantification of known and unknown DBPs - Formation of DBPs during different disinfection/oxidation processes - DBPs of concern in new technologies and/or new applications of existing technologies in water treatment

Disinfection Byproducts in Drinking Water: Detection and Treatment presents cutting-edge research on how to understand the procedures, processes and considerations for detecting and treating disinfection by-products from drinking water, swimming pool water, and wastewater. The book begins with an overview of the different groups of Disinfection Byproducts (DBPs), such as: Trihalomethanes (THM), Halo acetic acids, and Haloacetonitrile (HAN). This coverage is quickly followed by a clear and rigorous exposition of the latest methods and technologies for the characterization, occurrence, formation, transformation and removal of DBPs in drinking water. Other chapters focus on ultraviolet-visible spectroscopy, electron spin resonance, and gas chromatography-mass spectrometry. Researchers will find a valuable resource to a breath of topics for DBP detection and treatment, including various recent techniques, such as microfiltration, nanofiltration membrane and nanotechnology.

This book is a collection of chapters on the latest international research findings, including emerging issues and state-of-the-art studies, related to disinfection by-product formation and control in drinking waters and treated wastewaters.

There are many by-products of water disinfection that are still not fully understood and can be potentially harmful. In this volume all the current research in this area is discussed, along with an examination of the role of NOM (natural organic matter) and its relationship to DBP (disinfection by-product) formation and control in drinking water. Understanding the relationship of NOM to DBP may well lead to new techniques for analyzing and treating water and enable reasonable choices to be made for source-water protection, treatment plant process optimization, and distribution system operation to control DBP's. This volume emphasizes the characterization and reactivity of polar natural organic matter. It examines analytical methods which better characterize NOM and determines some of the polar and nonvolatile DBP forms. It presents innovative new methods, sich as capillary electrophoresis for haloacetic aceids and LC/MS for the identification of polar dinking water DBPs.

Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.