Biomethanization of the Organic Fraction of Municipal Solid Wastes is a comprehensive introduction to both the fundamentals and the more practical aspects of the anaerobic digestion of organic solid wastes, particularly those derived from households, that is, the organic fraction of municipal solid wastes (OFMSW). It can be used as a textbook for specialized courses and also as a guide for practitioners. In the first part, the book covers the relevant aspects of anaerobic digestion (AD) of organic wastes. The fundamentals and kinetic aspects of AD are reviewed with particular emphasis on the aspects related to solid wastes. This introduction is necessary to have a comprehensive view of the AD process and to understand the practical principles as well as the origin of possible problems arising from the management of the process. Chapter 2 emphasizes the role of kinetics in designing the reactor, paying special attention to existing models, particularly the dynamic ones. Through this introduction, it is intended to facilitate the technology transfer from laboratory or pilot plant experiences to full-scale process, in order to implement improvements in current digesters. Laboratory methods are described for the analysis and optimization of reactor performance, such as methanogenic activity tests or experimental evaluation of the biodegradation kinetics of solid organic waste. The different reaction patterns applied to industrial reactors are outlined. Industrial reactors are classified in accordance with the system they use, pointing out advantages and limitations. Co-digestion, enabling the co-treatment of organic wastes of different origin in a more economically feasible way, is described in detail. Examples of co-digestion are given, with OFMSW as a base-substrate. Finally, full-scale co-digestion plants are discussed. Various types (mechanical, biological, physico-chemical) of pre-treatment to increase the biodegradability, and thus the yields of the process, are reviewed in detail. The use of the fermentation products of anaerobic digesters for biological nutrient removal processes in wastewater treatment plants is described. This constitutes an example of integrated waste management, a field in which both economic and technical advances can be achieved. Balances are given to justify the approach, and a full-scale case study is presented. The important topic of economics and the ecological advantages of the process are emphasized. The use of compost, the integration with composting technology, and advantages over other technologies are detailed in the framework of an environmental impact assessment of biowaste treatment. Finally, the anaerobic digestion of MSW in landfills is reviewed in detail, with emphasis on landfill process enhancement and strategies for its application.

There is no description available for this title

The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Anaerobic digestion of the organic fraction of municipal solid waste as such or together with food waste, press water or patatoes sludge was investigated to equilibrate methane production within a day or over the weekend, when no OFMSW was available. A stable co-digestion process could be achieved with COD degradation between 60 and 80 %. The max. organic loading rates were 28 kg COD/L, d. For stable methane production the OLR during Co-digestion should not excede 22,5 kg/L,

The collection, transportation and subsequent processing of waste materials is a vast field of study which incorporates technical, social, legal, economic, environmental and regulatory issues. Common waste management practices include landfilling, biological treatment, incineration, and recycling – all boasting advantages and disadvantages. Waste management has changed significantly over the past ten years, with an increased focus on integrated waste management and life-cycle assessment (LCA), with the aim of reducing the reliance on landfill with its obvious environmental concerns in favour of greener solutions. With contributions from more than seventy internationally known experts presented in two volumes and backed by the International Waste Working Group and the International Solid Waste Association, detailed chapters cover: Waste Generation and Characterization Life Cycle Assessment of Waste Management Systems Waste Minimization Material Recycling Waste Collection Mechanical Treatment and Separation Thermal Treatment Biological Treatment Landfilling Special and Hazardous Waste Solid Waste Technology & Management is a balanced and detailed account of all aspects of municipal solid waste management, treatment and disposal, covering both engineering and management aspects with an overarching emphasis on the life-cycle approach.