The necessity of expertise for tackling the complicated and multidisciplinary issues of safety and risk has slowly permeated into all engineering applications so that risk analysis and management has gained a relevant role, both as a tool in support of plant design and as an indispensable means for emergency planning in accidental situations. This entails the acquisition of appropriate reliability modeling and risk analysis tools to complement the basic and specific engineering knowledge for the technological area of application.Aimed at providing an organic view of the subject, this book provides an introduction to the principal concepts and issues related to the safety of modern industrial activities. It also illustrates the classical techniques for reliability analysis and risk assessment used in current practice.

eliability and safety are fundamental attributes of any modern technological system. To achieve this, diverse types of protection barriers are placed as safeguards from the hazard posed by the operation of the system, within a multiple-barrier design concept. These barriers are intended to protect the system from failures of any of its elements, hardware, software, human and organizational. Correspondingly, the quantification of the probability of failure of the system and its protective barriers, through reliability and risk analyses, becomes a primary task in both the system design and operation phases. This exercise book serves as a complementary tool supporting the methodology concepts introduced in the books "An introduction to the basics of reliability and risk analysis" and "Computational methods for reliability and risk analysis" by Enrico Zio, in that it gives an opportunity to familiarize with the applications of classical and advanced techniques of reliability and risk analysis. This book is also available as a set with Computational Methods for Reliability and Risk Analysis and An Introduction to the Basics of Reliability and Risk Analysis.

Ernst G. Frankel This book has its origin in lecture notes developed over several years for use in a course in Systems Reliability for engineers concerned with the design of physical systems such as civil structures, power plants, and transport vehicles of all types. Increasing public concern with the reliability o~ systems for reasons of human safety, environmental protection, and acceptable ir. vestment risk limitations has resulted in an increasing interest by engineers in the formal applica~i0n of reliability theory to e~gineering desian. At the same time there is a demand for more effective approaches to the des~gn of procedures for the operation and use of man-made syste~s and more meaningful assessment of the risks intr)duction and use of such a system poses both when operating as designed and when operating at below design performance. The purpose of the book is to provide a sound, yet practical, introduction to reliability analysis and risk assessment which can be used by professionals in engineering, planning, management, and economics to improve the design, operation, and risk assessment of systems of interest. The text should be useful for students in many disciplines and is designed for fourth~year undergraduates or first-year graduate students. I would like to acknowledge the help of many of my graduate students who contributed to the development of this book by offering comments and criticism. Similarly I would like to thank Mrs.

This book illustrates a number of modelling and computational techniques for addressing relevant issues in reliability and risk analysis. In particular, it provides: i) a basic illustration of some methods used in reliability and risk analysis for modelling the stochastic failure and repair behaviour of systems, e.g. the Markov and Monte Carlo simulation methods; ii) an introduction to Genetic Algorithms, tailored to their application for RAMS (Reliability, Availability, Maintainability and Safety) optimization; iii) an introduction to key issues of system reliability and risk analysis, like dependent failures and importance measures; and iv) a presentation of the issue of uncertainty and of the techniques of sensitivity and uncertainty analysis used in support of reliability and risk analysis.The book provides a technical basis for senior undergraduate or graduate courses and a reference for researchers and practitioners in the field of reliability and risk analysis. Several practical examples are included to demonstrate the application of the concepts and techniques in practice.

Analysis of reliability and risk is an important and integral part of planning, construction and operation of all technical systems. To be able to perform such analyses systematically and scientifically, there is usually a need for special methods and models. This book presents the most important of these. Particular emphasis has been placed on the ideas and the motivation for the use of the various methods and models. It has been an objective to compile a book which provides practising engineers and engineering graduates with the concepts and basic techniques for evaluating reliability and risk. It is hoped that the material presented will make them so familiar with the subject that they can carry out various types of analyses themselves and understand and make use of the more detailed applications and additional material which is available in the journals and publications associated with their own discipline. It has also been an objective to put reliability and risk analyses in context - how such analyses should be used in design and operation of components and systems. The material presented is modern and a large part of the book is at research level. The book focuses on analysis of repairable systems, not only non-repairable systems which have traditionally been given most attention in textbooks on reliability theory. Since most real-life systems are repairable, methods for analysing repairable systems are an important area of research. The book presents general methods, with most applications taken from offshore petro leum activities.

Tools to Proactively Predict Failure The prediction of failures involves uncertainty, and problems associated with failures are inherently probabilistic. Their solution requires optimal tools to analyze strength of evidence and understand failure events and processes to gauge confidence in a design’s reliability. Reliability Engineering and Risk Analysis: A Practical Guide, Second Edition has already introduced a generation of engineers to the practical methods and techniques used in reliability and risk studies applicable to numerous disciplines. Written for both practicing professionals and engineering students, this comprehensive overview of reliability and risk analysis techniques has been fully updated, expanded, and revised to meet current needs. It concentrates on reliability analysis of complex systems and their components and also presents basic risk analysis techniques. Since reliability analysis is a multi-disciplinary subject, the scope of this book applies to most engineering disciplines, and its content is primarily based on the materials used in undergraduate and graduate-level courses at the University of Maryland. This book has greatly benefited from its authors' industrial experience. It balances a mixture of basic theory and applications and presents a large number of examples to illustrate various technical subjects. A proven educational tool, this bestselling classic will serve anyone working on real-life failure analysis and prediction problems.

We all like to know how reliable and how risky certain situations are, and our increasing reliance on technology has led to the need for more precise assessments than ever before. Such precision has resulted in efforts both to sharpen the notions of risk and reliability, and to quantify them. Quantification is required for normative decision-making, especially decisions pertaining to our safety and wellbeing. Increasingly in recent years Bayesian methods have become key to such quantifications. Reliability and Risk provides a comprehensive overview of the mathematical and statistical aspects of risk and reliability analysis, from a Bayesian perspective. This book sets out to change the way in which we think about reliability and survival analysis by casting them in the broader context of decision-making. This is achieved by: Providing a broad coverage of the diverse aspects of reliability, including: multivariate failure models, dynamic reliability, event history analysis, non-parametric Bayes, competing risks, co-operative and competing systems, and signature analysis. Covering the essentials of Bayesian statistics and exchangeability, enabling readers who are unfamiliar with Bayesian inference to benefit from the book. Introducing the notion of “composite reliability”, or the collective reliability of a population of items. Discussing the relationship between notions of reliability and survival analysis and econometrics and financial risk. Reliability and Risk can most profitably be used by practitioners and research workers in reliability and survivability as a source of information, reference, and open problems. It can also form the basis of a graduate level course in reliability and risk analysis for students in statistics, biostatistics, engineering (industrial, nuclear, systems), operations research, and other mathematically oriented scientists, wherein the instructor could supplement the material with examples and problems.