Introductory technical guidance for civil and geotechnical engineers and construction managers interested in design and construction in rock masses. Here is what is discussed: 1. GEOLOGIC DESCRIPTIONS 2. ROCK MASS CLASSIFICATION 3. SHEAR STRENGTH 4. ROCK FAILURE CHARACTERISTICS 5. FAILURE CRITERIA 6. SHEAR STRENGTH TESTS 7. SELECTION OF DESIGN SHEAR STRENGTH PARAMETERS 8. DEFORMATION AND SETTLEMENT 9. TEST METHODS FOR ESTIMATING MODULUS 10. OTHER METHODS FOR ESTIMATING MODULUS 11. CONSIDERATIONS IN SELECTING DESIGN MODULUS VALUES.

Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in rock mass characterization for foundations of buildings and infrastructure features. Here is what is discussed: 1. SCOPE, 2. INTACT ROCK VERSUS ROCK MASS, 3. GEOLOGIC DESCRIPTIONS, 4. ROCK MASS CLASSIFICATION, 5. SHEAR STRENGTH, 6. DEFORMATION AND SETTLEMENT.

This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.

Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton's Q and Q' systems, Bieniawski's RMR, Laubscher's MRMR and Hoek's and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. - Identify the most significant parameters influencing the behaviour of a rock mass - Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality - Provide a basis of understanding the characteristics of each rock mass class - Relate the experience of rock conditions at one site to the conditions and experience encountered at others - Derive quantitative data and guidelines for engineering design - Provide common basis for communication between engineers and geologists

Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure is a comprehensive, yet concise, guide to 16 of the most important rock classification systems and their failure modes. The book discusses these systems in relation to the design of excavations and ground reinforcement/support under passive, active, static, and dynamic mining conditions. This includes rock testing assessment, surface and underground site investigation, and any practical activity that deals with the physical and mechanical properties of rocks. The book is an excellent professional reference for geoscientists, technicians, and geological engineers doing research and consulting in mining, geological, civil, and petroleum resource fields.

More often than not, it is difficult or even impossible to obtain directly the specific rock parameters of interest using in situ methods. The procedures for measuring most rock properties are also time consuming and expensive. Engineering Properties of Rocks, Second Edition, explores the use of typical values and/or empirical correlations of similar rocks to determine the specific parameters needed. The book is based on the author's extensive experience and offers a single source of information for the evaluation of rock properties. It systematically describes the classification and characterization of intact rock, rock discontinuities, and rock masses, and presents the various indirect methods for estimating the deformability, strength, and permeability of these components as well as the in situ rock stresses. - Presents a single source for the correlations on rock properties - Saves time and resources invested on in situ testing procedures - Fully updated with current literature - Expanded coverage of rock types and geographical locations