Introductory technical guidance for professional engineers and construction managers interested in storage and dispensing of petroleum fuel products. Here is what is discussed: 1. INTRODUCTION, 2. GENERAL REQUIREMENTS, 3. RECEIVING FACILITIES, 4. DISPENSING FACILITIES, 5. PIPING SYSTEMS, 6. EQUIPMENT DESCRIPTIONS, 7. CONTROLS, 8. CANOPIES, 9. PRODUCT RECOVERY SYSTEMS, 10. FUEL ADDITIVES.

Introductory technical guidance for professional engineers interested in design and construction of petroleum handling facilities. Here is what is discussed: 1. INTERTERMINAL AND INSTALLATION PIPELINES, 2. GROUND PRODUCTS FUELING FACILITIES.

Introductory technical guidance for civil, mechanical and petroleum engineers interested in design and construction of atmospheric petroleum fuel storage tanks. Here is what is discussed: 1. INTRODUCTION 2. GENERAL REQUIREMENTS 3. GENERAL CRITERIA 4. HORIZONTAL ABOVEGROUND TANKS (SINGLE-WALL STEEL) 5. HORIZONTAL ABOVEGROUND TANKS (DOUBLE-WALL STEEL) 6. HORIZONTAL ABOVEGROUND TANKS (FIRE-RESISTANT) 7. HORIZONTAL ABOVEGROUND TANKS (PROTECTED TANKS) 8. ABOVEGROUND VERTICAL STORAGE TANKS 9. UNDERGROUND HORIZONTAL STORAGE TANKS 10. UNDERGROUND VERTICAL STORAGE TANKS (CUT AND COVER) 11. APPURTENANCES 12. HEATERS 13. UNDERGROUND STORAGE TANK SPILL CONTAINMENT SYSTEMS 14. ABOVEGROUND TANK SPILL CONTAINMENT SYSTEMS 15. MISCELLANEOUS USE TANKS 16. SHIPBOARD OFF-LOAD FUEL STORAGE TANKS.

Introductory technical guidance for civil, mechanical and petroleum engineers interested in design, construction and operation of petroleum fuel handling facilities. Here is what is discussed: 1. AIRCRAFT FUELING FACILITIES 2. ATMOSPHERIC STORAGE TANKS 3. BULK FUEL STORAGE 4. GENERAL DESIGN INFORMATION 5. MARINE FUELING FACILITIES 6. PIPELINES AND GROUND FUELING FACILITIES 7. PIPING SYSTEMS 8. OPERATION AND MAINTENANCE. 9. OILY WASTEWATER COLLECTION AND TREATMENT

Introductory technical guidance for civil engineers, environmental engineers and other professional engineers and construction managers interested in industrial water treatment. Here is what is discussed: 1. CHEMICAL CLEANING OF INDUSTRIAL WATER SYSTEMS, 2. COOLING TOWER WATER TREATMENT, 3. MAKEUP WATER FOR INDUSTRIAL WATER SYSTEMS, 4. OILY WASTEWATER COLLECTION AND TREATMENT, 5. PRETREATMENT CONSIDERATIONS FOR WATER DESALINATION, 6. TREATMENT OF CLOSED INDUSTRIAL WATER SYSTEMS, 7. WATER SAMPLING AND TESTING, 8. TREATMENT OF STEAM BOILER WATER.

Introductory technical guidance for civil engineers, environmental engineers, mechanical engineers and other professional engineers and construction managers interested in oily wastewater collection and treatment. Here is what is discussed: 1. OBJECTIVES, 2. SOURCES, 3. DISCHARGE CRITERIA, 4. POINT SOURCE CONTROL, 5. DISPOSAL OF OIL, 6. EMERGENCY CONTAINMENT AND CLEANUP, 7. OILY WASTEWATER CHARACTERISTICS, 8. COLLECTION AND TRANSFER, 9. OILY WASTEWATER TREATMENT, 10. DESIGN CRITERIA FOR OIL-WATER SEPARATORS AND APPURTENANCES.

Introductory technical guidance for civil engineers, structural engineers, bridge engineers and construction managers interested in hydraulic analysis of bridges. Here is what is discussed: 1. INTRODUCTION, 2. HYDRAULIC MODELING CRITERIA AND SELECTION, 3. SELECTING UPSTREAM AND DOWNSTREAM MODEL EXTENT, 4. IDENTIFYING AND SELECTING MODEL BOUNDARY CONDITIONS.