The study of the solid part of the earth on which structures are built is an essential part of the training of a civil engineer. Geotechnical processes such as drilling, pumping and injection techniques enhance the viability of many construction processes by improving ground conditions. Highlighting the ground investigation necessary for the process, the likely improvement in strength of treated ground and testing methods An Introduction to Geotechnical Processes covers the elements of ground treatment and improvement, from the control of groundwater, drilling and grouting to ground anchors and electro-chemical hardening.

This book is mainly intended to meet the needs of undergraduate students of Civil Engineering. In preparing the first edition of this book, I had two principal aims: firstly to provide the student with a description of soil behavior-and of the effects of the clay minerals and the soil water on such behavior-which was rather more detailed than is usual in an elementary text, and secondly to encourage him to look critically at the traditional methods of analysis and design. The latter point is important, since all such methods require certain simplifying assumptions without which no solution is generally possible. Serious errors in design are seldom the result of failure to understand the methods as such. They more usually arise from a failure to study and understand the geology of the site, or from attempts to apply analytical methods to problems for which the implicit assumptions make them unsuitable. In the design of foundations and earth structures, more than in most branches of engineering, the engineer must be continually exercising his judgment in making decisions. The analytical methods cannot relieve him of this responsibility but properly used, they should ensure that his judgment is based on sound knowledge and not on blind intuition. I hope that the book will prove to be of use to students when their courses are over, and help to bridge the awkward gap between theory and practice.

A descriptive, elementary introduction to geotechnical engineering - with applications to civil engineering practice. *focuses on the engineering classification, behavior, and properties of soils necessary for the design and construction of foundations and earth structures. *introduces vibratory and dynamic compaction, the method of fragments, the Schmertmann procedure for determining field compressibility, secondary compression, liquefaction, and an extensive use of the stress path method.

Geotechnical Engineering: Principles and Practices, 2/e, is ideal or junior-level soil mechanics or introductory geotechnical engineering courses. This introductory geotechnical engineering textbook explores both the principles of soil mechanics and their application to engineering practice. It offers a rigorous, yet accessible and easy-to-read approach, as well as technical depth and an emphasis on understanding the physical basis for soil behavior. The second edition has been revised to include updated content and many new problems and exercises, as well as to reflect feedback from reviewers and the authors' own experiences.

A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

Learn to use probabilistic techniques to solve problems in geotechnical engineering. The book reviews the statistical theories needed to develop the methodologies and interpret the results. Next, the authors explore probabilistic methods of analysis, such as the first order second moment method, the point estimate method, and random set theory. Examples and case histories guide you step by step in applying the techniques to particular problems.

An ideal resource for civil engineers working with offshore structures, pipelines, dredging, and coastal erosion, Seafloor Processes and Geotechnology bridges the gap between the standard soil mechanics curriculum of civil engineering and published material on marine geotechnology. Utilizing organized information on sediments and foundations for ma