Introductory technical guidance for civil and geotechnical engineers nd construction managers interested in design, engineering and construction of flood and retaining walls. Here is what is discussed: 1. ALTERNATE TYPES OF RETAINING WALLS 2. DESIGN AND CONSTRUCTION DETAILS AND CAUSES OF UNSATISFACTORY PERFORMANCE OF FLOOD WALLS 3. FORCES ON FLOOD WALLS DUE TO EARTH PRESSURE 4. FLOOD WALL FOUNDATION ANALYSIS 5. GENERAL CONSIDERATIONS FOR FLOOD AND RETAINING WALLS 6. GRAVITY AND CANTILEVER FLOOD WALLS 7. SPECIAL CONSIDERATIONS FOR FLOOD WALLS 8. STRUCTURAL STABILITY OF FLOOD WALLS 9. WATER FORCES ON FLOOD WALLS..

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in flood and retaining walls. Here is what is discussed: 1. INTRODUCTION, 2. TYPES OF FLOOD WALLS, 3. DIFFERENCES BETWEEN RETAINING AND FLOOD WALLS, 4. COORDINATION BETWEEN DISCIPLINES, 5. GEOTECHNICAL INVESTIGATION, 6. DESIGN STRENGTH SELECTION, 7. PROBABLE MAXIMUM FLOOD HYDROGRAPHS, 8. WESTERN MOUNTAIN SNOWMELT EQUATION.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of flood walls. Here is what is discussed: 1. WALL SYSTEMS, 2. ANCHORED PILE WALLS ADVANTAGES, 3. OTHER WALL SYSTEMS.

Introductory technical guidance for Professional Engineers and construction managers interested in flood wall protection.

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of flood walls. Here is what is discussed: 1. FOUNDATION PREPARATION, 2. CONCRETE MATERIALS, 3. CONSTRUCTABILITY, 4. JOINTS, 5. SOIL BACKFILL, 6. DRAINAGE, 7. CONSTRUCTION CONSIDERATIONS, 8. CAUSES OF UNSATISFACTORY PERFORMANCE.

Introductory technical guidance for civil engineers and other professional engineers and construction managers’ interested if flood wall design and construction. Here is what is discussed: 1. INTRODUCTION, 2. INCORPORATION OF RISK IN DESIGN AND EVALUATION OF WALLS DETERMINISTIC ANALYSIS, 3. POTENTIAL FAILURE MODES, 4. GENERAL POTENTIAL FAILURE MODE DESCRIPTIONS, 5. GENERAL PFMS FOR CONCRETE WALLS WITH A SHALLOW FOUNDATION, 6. PERFORMANCE FACTORS CONTRIBUTING TO PFMS.

Provides guidance for the safe design and economical construction of retaining walls and inland and coastal flood walls. This manual considers the retaining walls subjected to hydraulic loadings, such as flowing water, submergence, and wave action. It also discusses issues, such as design considerations, forces, and foundation analysis.