This book is a milestone in the evolution of wastewater treatment operations. It explains the science of treatment framed within an ethics where wastewater personnel are seen as protectors of public health, preservers of the environment, and stewards of public monies. Written by a former plant operator with a Ph.D., the book presents the fundamental science behind the unit processes in wastewater treatment plants, including biological nutrient removal. In so doing, it challenges longstanding operational doctrines enshrined by habit and tradition, such as being careful not to remove too many influent organics in a primary clarifier for fear of starving the microorganisms in the aeration basin, or using the MLSS concentration to control effluent quality, or cutting the growth rate of microorganisms in anticipation of their slower growth rate in winter. Dispelling much of the prevailing that's-the-way-we've-always-done-it dogma is achieved through an elegant and understandable presentation of the biology, chemistry, and physics that explain the phenomena of wastewater treatment. At the same time, the book is intensely practical. It offers detailed and data-based process control solutions to stabilize plant performance, maintain consistent effluent quality, and reduce energy costs. Powerful, easily implemented statistical techniques are given to unlock the meaning of plant performance data and make informed process control decisions. The book's approach is learning-focused, including numerous examples of a failsafe, foolproof arithmetical method that enables operations professionals to define, set up, and solve problems.

Introduction to Wastewater Treatment Processes considers various types of wastewater problems and the selection of proper mode of treatment, as well as the design of the equipment required. This book is divided into eight chapters and begins with a summary of the theory involved in the specific process, such as chemical kinetics and material and energy balances. The next chapter deals with the physical and chemical principles of wastewater treatment processes. These topics are followed by discussions of the important design parameters involved in the process and the determination of such parameters using laboratory-scale or pilot-plant equipment. Other chapters explore the development of a systematic design procedure for the treatment plant. The final chapters look into the mathematical modeling of biological treatment processes. This book will prove useful to practicing engineers and students.

Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies

Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

This title is only available as a free copy to download from the WaterWiki. To download your free copy of the eBook, click here. The manual can be used independantly but when used in combination with the CD-ROM, it makes a unique tool for process operators to diagnose and solve operational problems. It is also a valuable educational and training package for universities and post experience courses. Click here for more details about the CD-ROM Process stability and final effluent quality largely depend upon the composition of the biomass in an activated sludge plant. Operational problems such as bulking and scum formation occur when the wrong micro-organisms are dominating the sludge population. Microscopic sludge investigation is therefore essential for process control and stable plant operation. The manual outlines the theoretical framework, extensively illustrated with full-colour micrographs. Contents Microscopy Microscopic sludge investigation Characteristics of activated sludge flocs Filamentous micro-organisms Protozoa and metazoa Conclusions of microscopic sludge investigation The activated sludge process Operational problems Bulking sludge Scum formation

This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9