Experimental investigation in turbulent boundary layer flows represents one of the canonical geometries of wall bounded shear flows. Utmost relevance of such experiments, however, is applied in the engineering applications in aerospace and marine industries. In particular, continuous effort is being imparted to explore the underlying physics of the flow in order to develop models for numerical tools and to achieve flow control. Flow control experiments have been widely investigated since 1930’s. Several flow control technique has been explored and have shown potential benefit. But the choice of control technique depends largely on the boundary condition and the type of application. Hence, friction drag of subsonic transport aircraft is intended to be reduced within the scope of this Ph. D. topic. Therefore, application of active control method such as microblowing effect in the incompressible, zero pressure gradient turbulent boundary layer was investigated. A series of experiments have been performed in two different wind tunnel facilities. Wind tunnel from Department of Aerodynamics and Fluid Mechanics (LAS) was used for the measurements for moderate Reynolds number range in co-operation with the wind tunnel from Laboratoire de M´ecanique de Feiret Lille for large Reynolds number range. Measurements are conducted with the help of state-of-the-art techniques such as Laser Doppler Anemometry, Particle Image Velocimetry and electronic pressure sensors.

"Vive la Revolution!" was the theme of the Twenty-Third Symposium on Naval Hydrodynamics held in Val de Reuil, France, from September 17-22, 2000 as more than 140 experts in ship design, construction, and operation came together to exchange naval research developments. The forum encouraged both formal and informal discussion of presented papers, and the occasion provides an opportunity for direct communication between international peers. This book includes sixty-three papers presented at the symposium which was organized jointly by the Office of Naval Research, the National Research Council (Naval Studies Board), and the Bassin d'Essais des Carènes. This book includes the ten topical areas discussed at the symposium: wave-induced motions and loads, hydrodynamics in ship design, propulsor hydrodynamics and hydroacoustics, CFD validation, viscous ship hydrodynamics, cavitation and bubbly flow, wave hydrodynamics, wake dynamics, shallow water hydrodynamics, and fluid dynamics in the naval context.

Experimental data obtained in a two-dimensional turbulent boundary layer (TBL) flow and a three-dimensional (3D) pressure-driven TBL flow around a wing/body junction are presented. Reynolds number effects are investigated. Fine spatial resolution laser-Doppler velocimeter measurements of mean velocity and higher order statistics including the third order products measured for 9 stations are reported. Reynolds number based on momentum thickness (Re sub theta) of the developing 2-D boundary layer on the wall was Re sub theta = 232OO, and the approach nominal reference velocity of the undisturbed air flow was 32 m/sec. The wing shape used had a 3:2 elliptical nose, NACA 0020 profiled tail and it was mounted on a flat wall. Distribution of measured static pressure variation on the wall, turbulent kinetic energy and some derived quantities such as the flow angle, flow gradient angle, shear stress angle, and modeling parameters are also discussed.