Provides the minimum requirements for inflow preventer assemblies, including material design, inspection testing, marking, handling, and packaging for shipment. This standard can be referenced in documents for inflow preventer assemblies.

Operators, technicians, and engineers will find the information in this manual useful for gaining a basic understanding of the use and application of air valves. A valuable guide for selecting, sizing, locating, and installing air valves in water applications, M51 provides information on air valve types listed in AWWA Standard C512, latest edition, including the following: air-release valve; air/vacuum valve; and combination air valve.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

This book provides a highly illustrated guide to the design, installation and maintenance of hot and cold water supply systems for domestic buildings. Based on British Standard BS 6700, the new edition takes into account revisions to the standard since the book was first published in 1991. It has also been updated to give guidance on the 1999 Water Supply Regulations and includes revisions to the Building Regulations. Written for designers and installers, this immensely practical book will also be of interest to technical staff of water undertakers, property services managers and students of NVQ and BTech courses. It was specially commissioned by the British Standards Institution and written for BSI by Bob Garrett, formerly of Langley College of Further Education and past President of the National Association of Plumbing Teachers.