This book has arisen directly from a course on Air and Water Pollution Control delivered by the first named author at the Technical University of Berlin. Extractions of this course have been presented in Brazil, Turkey and India. It was at the Indian Institute of Technology of Madras where the first named author got in contact with Professor Varma, who turned out to be a suggestive, cooperative coauthor. This book is addressed primarily to chemical, environmental and mechanical engineers, engaged in the design and operation of equipment for air pollution control. But it will certainly be helpful to chemists and physicists confronted with the solution of environmental problems. Furthermore it is intended as a text book for engineering courses on environmental protection. The goal of the book is the presentation of knowledge on design and operation of equipment applicable to the abatement of harmful emissions into air. The technology of air pollution control is of relatively young age, but it has already achieved a high degree of performance, due to the research and develop ment work invested in the last decades in this field.

The selection of air pollution control apparatus can be a daunting task even for experienced pollution control professionals. The Air Pollution Control Equipment Selection Guide eases the burden by providing extensive information on the best equipment available for any air pollution control problem. Instead of endorsing one technology over another, the author provides general information so that you can decide on the proper technology to use for any given application. The book offers ample introductory information including a helpful "Air Pollution 101" chapter that reviews the basics of air pollution control. The text is divided into sections that are organized by the primary technology employed, i.e., Quenching, Cooling, Particulate Removal, Gas Absorption, etc. This structure enables you to jump from section to section and quickly compare technologies. Each section defines the type of gas cleaning device, the basic physical forces used in it, its common sizes, and its most common uses. Many air pollution control problems are not solved with one type of device, but through using a variety of designs synergistically. To make this task easier, the author includes sections on each of these devices and notes where they are commonly used in concert with other equipment. Wherever possible, the text includes current photographs or drawings of typical equipment within that device type. Written in an easy to read style, Air Pollution Control Equipment Selection Guide serves as a technologically accurate reference that will facilitate the selection of air pollution control equipment for any operation.

Unique problem-and-solution approach for quickly mastering a broad range of calculations This book's problem-and-solution approach enables readers to quickly grasp the fundamentals of air pollution control equipment and essential applications. Moreover, the author sets forth solid principles for the design and selection of air pollution control equipment as well as for its efficient operation and maintenance. Readers gain a deep understanding of both the equipment itself and the many factors affecting performance. Following two introductory chapters, the book dedicates four chapters to examining control equipment for gaseous pollutants, including adsorption, absorption, and incineration equipment. The remaining six chapters deal with equipment for managing airborne particulate pollutants, including gravity settlers, cyclones, electrostatic precipitators, scrubbers, and baghouses. The appendix contains discussions of hybrid systems, the SI system (including conversion constants), and a cost-equipment model. Each chapter offers a short introduction to the control device discussed. Next, progressively more difficult problems with accompanying solutions enable readers to build their knowledge as they advance through the chapter. Problems reflect the most recent developments in pollution control and include a variety of performance equations and operation and maintenance calculations. Each problem includes a statement of the problem, the data used to solve the problem, and a detailed solution. Readers may further hone their skills by visiting the text's Web site for additional problems and solutions. This publication serves both as a textbook for engineering students and as areference for engineers and technicians who need to ensure that air pollution control equipment operates efficiently and enables their facility to meet all air pollution control standards and regulations.

Unique problem-and-solution approach for quickly mastering a broad range of calculations This book's problem-and-solution approach enables readers to quickly grasp the fundamentals of air pollution control equipment and essential applications. Moreover, the author sets forth solid principles for the design and selection of air pollution control equipment as well as for its efficient operation and maintenance. Readers gain a deep understanding of both the equipment itself and the many factors affecting performance. Following two introductory chapters, the book dedicates four chapters to examining control equipment for gaseous pollutants, including adsorption, absorption, and incineration equipment. The remaining six chapters deal with equipment for managing airborne particulate pollutants, including gravity settlers, cyclones, electrostatic precipitators, scrubbers, and baghouses. The appendix contains discussions of hybrid systems, the SI system (including conversion constants), and a cost-equipment model. Each chapter offers a short introduction to the control device discussed. Next, progressively more difficult problems with accompanying solutions enable readers to build their knowledge as they advance through the chapter. Problems reflect the most recent developments in pollution control and include a variety of performance equations and operation and maintenance calculations. Each problem includes a statement of the problem, the data used to solve the problem, and a detailed solution. Readers may further hone their skills by visiting the text's Web site for additional problems and solutions. This publication serves both as a textbook for engineering students and as a reference for engineers and technicians who need to ensure that air pollution control equipment operates efficiently and enables their facility to meet all air pollution control standards and regulations.

Unique problem-and-solution approach for quickly mastering a broad range of calculations This book's problem-and-solution approach enables readers to quickly grasp the fundamentals of air pollution control equipment and essential applications. Moreover, the author sets forth solid principles for the design and selection of air pollution control equipment as well as for its efficient operation and maintenance. Readers gain a deep understanding of both the equipment itself and the many factors affecting performance. Following two introductory chapters, the book dedicates four chapters to examining control equipment for gaseous pollutants, including adsorption, absorption, and incineration equipment. The remaining six chapters deal with equipment for managing airborne particulate pollutants, including gravity settlers, cyclones, electrostatic precipitators, scrubbers, and baghouses. The appendix contains discussions of hybrid systems, the SI system (including conversion constants), and a cost-equipment model. Each chapter offers a short introduction to the control device discussed. Next, progressively more difficult problems with accompanying solutions enable readers to build their knowledge as they advance through the chapter. Problems reflect the most recent developments in pollution control and include a variety of performance equations and operation and maintenance calculations. Each problem includes a statement of the problem, the data used to solve the problem, and a detailed solution. Readers may further hone their skills by visiting the text's Web site for additional problems and solutions. This publication serves both as a textbook for engineering students and as a reference for engineers and technicians who need to ensure that air pollution control equipment operates efficiently and enables their facility to meet all air pollution control standards and regulations.

With the advent of the Clean Air Act in 1970, the number of air pollution control equipment installations has increased at an accelerated pace. Although much has been written on attaining collection performance with the various control devices, a major void has occurred in the identification and transfer of information needed to help reduce maintenance costs and to prevent deterioration of collector perform ance. Although design and selection information is presented, it is the primary inten tion of this book to discuss operation and maintenance topics and explore many of the repetitive problems that have plagued users of air pollution control equipment. The existence of these problems may be related to the complexity of the process or to a lack of well-defined operation techniques, among other reasons. In any event, this book intends to emphasize where and how these factors can have a major impact on the maintenance problems of control devices. Operation and maintenance problems have plagued users for nearly 100 years.