The 11th International Symposium on Superconductivity was held November 16-19, 1998, in Fukuoka, Japan. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to new applications. At the 11th Symposium, there was increased interest reported in the development of trial devices using bismuth wires and yttrium-based bulk materials. Among the presentations were those that clearly defined the development targets for next-generation yttrium-based wires and bulk materials and single-flux quantum (SFQ) circuits. Other popular topics were high-temperature superconductivity applications such as SQUIDs, microwave filters, and cryocooler-cooled magnets. With more than 600 participants from 18 countries, the symposium provided an excellent forum for exchanges of the most recent information in the field of superconductivity.

The 12th International Symposium on Superconductivity was held in Morioka, Japan, October 17-19, 1999. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to a variety of applications. At the 12th Symposium, a mini-symposium focusing on the two-dimensionality of high-temperature superconductors, or the c-axis transport, and a session on vortex physics were organized. There were also many reports on the recent developments of YBCO-based coated conductors both in the United States and in Japan, AC losses of wires and tapes, developments of bulk materials with strong flux pinning, the recent progress in thin film and junction technologies, and the demonstration of various electronics applications using SQUIDs, microwave devices, and single-flux-quantum (SFQ) digital devices. This volume is a valuable resource for all those working in the field of superconductivity.

In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.

Five years have passed since the breakthrough in the critical temperature for superconductors. During this period, many superconducting materials have been discovered and developed, and our knowledge of the physical and other properties of oxide superconductors has deepened through extensive and intensive research. This knowledge has advanced superconductivity science and technology from the initial questioning stage to a more developed but still uncertain second stage where research activity in superconductivity now overlaps with fields of application. Generally speaking, science resonates with technology. Science not only complements but also competes with or stimulates technology. New scientific knowledge has triggered the second technological research stage. Much progress has been made in the development of practical devices, encouraging the application of superconductors in areas such as human levitation, a high speed levitated bearing, large current transforming leads, and high frequency devices. This technological progress has increased our understanding of the science involved, such as flux pinning and dynamics, and anomalous long-range superconducting interactions. At this important stage, international cooperation and collaborative projects can effectively sustain aggressive research and development in order to advance superconductivity to the next stages. The ISS Symposium is expected to serve as a venue for increasing our knowledge of superconductivity and for exchanging visions for future research and applications, through the presentation and discus of the latest research results. These proceedings also aim to summarize sion annual progress in high-Tc superconductivity in all fields.

More than seven years have passed since the dramatic breakthrough in the critical temperature for superconductors. During this period, a host of new materials have been discovered, and efforts have been stepped up in a variety of domains including device and systems applications, commercialization, and basic research on the properties of superconductive materials. Recent progress in areas such as bulk single crystal production, long-scale wire and tape produc tion, flywheel and bearing applications, and electronic device applications for thin films indicate that science and technology have been working hand in hand in this field, as has been the case in the research and development of semi conductors. This interdisciplinary "resonance" will be certain to lead to further outstanding advances in the years to come. It goes without saying that worldwide information exchange is the key to accelerating progress in superconductivity science and technology. As in previous years, the ISS '93 served as a venue where visions of future develop ments were shared in addition to presentations and extensive discussions on the most up-to-date research results. I hope that the Proceedings contained in this volume will be consulted not only as a summary of the current "state of the art" in high-Tc superconductivity but also as a stimulating source of ideas regarding future applications of superconductivity research.

Since the discovery of superconductivity with trans1tton temperatures above 77 K, concentrated research activities toward the exploration of practical applica tions of these materials have been carried out. Currently, a remarkable improve ment in superconducting properties has been achieved due to the fine optimization of fabrication processes, and this has attracted industrial interest for future applications. In the case of NdBa Cu 0 materials, a new pinning mecha 2 3 7 nism was found which enhances the critical current under applied magnetic fields. In single crystals of these materials, oxygen control results in an increase in the growth rate. The metalorganic chemical vapor deposition (MOCVD) film quality has been improved by using a new liquid raw material. Simultaneously, real demands from the viewpoint of the market start to be a motivation force, es pecially in electronics application where some products are already being sold. At the same time, interesting physical properlies have been obtained from a new superconducting single crystal which has a layered perovskite structure without copper. In addition, various precision measurement techniques have confirmed the d-wave mechanism and the existence of intrinsicJosephson junctions in single crystals. These new phenomena challenge the existing theoretical models but also open the way for new applications. These significant areas of progress in materials science have led high-Tc super conductivity research into the next phase of activity, while fundamental research continues to be very important. I sincerely hope that this volume will give further impetus to this development.

This is the last of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world. Viable applications of superconductors rely fundamentally on an understanding of these intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. While the first volume covers fundamentals and various classes of materials, the second addresses processing of these into various shapes and configurations needed for applications, and ends with chapters on refrigeration methods necessary to attain the superconducting state and the desired performance. This third volume starts with a wide range of methods permitting one to characterize both the materials and various end products of processing. Subsequently, diverse classes of both large scale and electronic applications are described. Volume 3 ends with a glossary relevant to all three volumes. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on familiarity with the characterization methods and offers descriptions of representative examples of practical applications A comprehensive reference, the handbook is suitable for both graduate students and practitioners in experimental physics, materials science, and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.