This report looks at what motivations exist for interoperability and defines a reasonable framework from which to work if and when interoperability needs and investments meet strategic language in the United States.

Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.

This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.

Comprehensive and practical guide to the selection and design of a wide range of chemical process equipment. Emphasis is placed on real-world process design and performance of equipment. Provides examples of successful applications, with numerous drawings, graphs, and tables to show the functioning and performance of the equipment. Equipment rating forms and manufacturers' questionnaires are collected to illustrate the data essential to process design. Includes a chapter on equipment cost and addresses economic concerns. - Practical guide to the selection and design of a wide range of chemical process equipment. Examples of successful, real-world applications are provided - Fully revised and updated with valuable shortcut methods, rules of thumb, and equipment rating forms and manufacturers' questionnaires have been collected to demonstrate the design process. Many line drawings, graphs, and tables illustrate performance data - Chapter 19 has been expanded to cover new information on membrane separation. Approximately 100 worked examples are included. End of chapter references also are provided