Pneumatic Conveying Design Guide is a guide for the design of pneumatic conveying systems and includes detailed data and information on the conveying characteristics of a number of materials with a wide range of properties. This book includes logic diagrams for design procedures and scaling parameters for the conveying line configuration. It also explains how to improve the performance of pneumatic conveyors by optimizing, uprating, and extending the system or adapting it for a change of material. This book consists of 15 chapters divided into three sections and opens with an overview of the state of the art on pneumatic conveying, along with definitions of the terms used in pneumatic conveying. The next chapter describes the various types of pneumatic conveying systems and the parameters that influence their capabilities in terms of material flow rate and conveying distance. The discussion then turns to feeding and discharging of the conveying line; selection of a pneumatic conveying system for a particular application; and design procedures for pneumatic conveying system. The theory and use of compressed air in pneumatic conveying are also considered, along with the effect of material properties on conveying performance; troubleshooting; and operational problems and some solutions. The final chapter is devoted to the use of bench-scale test methods to determine the material properties relevant to pneumatic conveying. This monograph is intended for designers and users of pneumatic conveying systems.

At last, a book that covers safety procedures and standards with information that is rarely available outside of proprietary materials. A comprehensive source for basic and essential operations and procedures in use in any facility, the book offers chemical operators and first line supervisors guidance in applying appropriate practices to prevent accidents, and suggests which practices to avoid.

Inherently safer plants begin with the initial design. Here is where integrity and reliability can be built in at the lowest cost, and with maximum effectiveness. This book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage. All engineers on the design team, the process hazard analysis team, and those who make basic decisions on plant design, will benefit from its comprehensive coverage, its organization, and the extensive references to literature, codes, and standards that accompany each chapter.

The authors' aim with this handbook, is to provide a rapid ready-reference to help in the often complex task of handling, using and disposing of chemicals safely and with minimum risk to people's health or damage to facilities or to the environment. The book provides look-up data, and concise, clear explanations of general chemical principles, physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to compliance with designated safe practice, control of risks to people's health and limitation of environmental impact. - Over 600 pages of valuable reference materialIncludes information on physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to complianceSummarizes core information for quick reference in the workplace or in transit