Excerpt from A Study of the Inductance of Four-Terminal Resistance Standards When the shunts R - ls and RX are not of equal resistance the second balance may be obtained in either of two ways. First, by simply increasing R2, and, second, by changing the primary connections of the transformer from parallel to series. By making both these changes, shunts of very different resistance can be directly com pared. The assumption made in the second method, 'that the phase angle of a well-designed transformer is a function of the secondary circuit conditions only, has been repeatedly justified by measurements at the Bureau of Standards. As a further check, shunts E and H having and ohm, respectively, were compared by the two methods. The results given in Table 1 show an excellent agreement. Similar measurements at 700 cycles also agreed, showing that up to that frequency the electrostatic capacity between the windings. Does not affect the accuracy of the method. It is to be noted that by changing connections both shunts are kept at approximately their full current capacity and thus there is no loss of sensitivity if these capacities are different. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Established by Congress in 1901, the National Bureau of Standards (NBS), now the National Institute of Standards and Technology (NIST), has a long and distinguished history as the custodian and disseminator of the United States' standards of physical measurement. Having reached its centennial anniversary, the NBS/NIST reflects on and celebrates its first century with this book describing some of its seminal contributions to science and technology. Within these pages are 102 vignettes that describe some of the Institute's classic publications. Each vignette relates the context in which the publication appeared, its impact on science, technology, and the general public, and brief details about the lives and work of the authors. The groundbreaking works depicted include: A breakthrough paper on laser-cooling of atoms below the Doppler limit, which led to the award of the 1997 Nobel Prize for Physics to William D. Phillips The official report on the development of the radio proximity fuse, one of the most important new weapons of World War II The 1932 paper reporting the discovery of deuterium in experiments that led to Harold Urey's1934 Nobel Prize for Chemistry A review of the development of the SEAC, the first digital computer to employ stored programs and the first to process images in digital form The first paper demonstrating that parity is not conserved in nuclear physics, a result that shattered a fundamental concept of theoretical physics and led to a Nobel Prize for T. D. Lee and C. Y. Yang "Observation of Bose-Einstein Condensation in a Dilute Atomic Vapor," a 1995 paper that has already opened vast new areas of research A landmark contribution to the field of protein crystallography by Wlodawer and coworkers on the use of joint x-ray and neutron diffraction to determine the structure of proteins

The various systems of measurement, with their respective sets of units, used in the literature on electricity and magnetism are described in detail. Their historical development is summarized. The manner in which each is derived from either of the two alternative points of view of the experimentalist and the theoretician is compared and contrasted. The desirability of recognizing both points of view in international standardization, particularly when discussing rationalization, is pointed out. The present status of the absolute measurements on which all electrical units are based is reported, and tables are included for the conversion of equations and numerical values from one system to another.

Focused on the field of knowledge lying between digital and analog circuit theory, this new text will help engineers working with digital systems shorten their product development cycles and help fix their latest design problems. The scope of the material covered includes signal reflection, crosstalk, and noise problems which occur in high speed digital machines (above 10 megahertz). This volume will be of practical use to digital logic designers, staff and senior communications scientists, and all those interested in digital design.