The Nuclear Threat Initiative and the Center for Strategic and International Studies joined to launch the New Approaches to the Fuel Cycle project. This project sought to build consensus on common goals, address practical challenges, and engage a spectrum of actors that influence policymaking regarding the nuclear fuel cycle. The project also tackled one of the toughest issues—spent nuclear fuel and high level waste—to see if solutions there might offer incentives to states on the front end of the nuclear fuel cycle and address the inherent inertia and concerns about additional burdens and restrictions that have stalled past efforts to improve the robustness of the nonproliferation regime. This report presents the group’s conclusions that a best-practices approach to the nuclear fuel cycle can achieve these objectives and offer a path to a more secure and sustainable nuclear landscape.

Global energy demands are driving a potential expansion in the use of nuclear energy worldwide. It is estimated that the global nuclear power capacity could double by 2030. This could result in dissemination of sensitive nuclear technologies that present obvious risks of proliferation. Certain international institutional mechanisms for controlling access to sensitive materials, facilities and technologies are needed for dealing with this problem. Over the past few years, 12 proposals have been put forward by states, nuclear industry and international organizations, aimed at checking the spread of uranium enrichment and spent fuel reprocessing technologies. This book presents an overview and analysis of these proposals, including an evaluation of the projected international mechanisms.

In recent years, activities related to the nuclear fuel cycle have expanded globally. In addition, the complexity of the nuclear fuel cycle market has increased with the emergence of new providers of fuel cycle services. In this context, a need was perceived for a compilation of country profiles on nuclear fuel cycle activities in a form which could be easily understood both by experts and by the public, and which should lead to a greater understanding of these activities worldwide. Furthermore, such information would improve the transparency of nuclear energy development in general. The first edition was published in 2001 and showed the status of the nuclear fuel cycle at the end of 1999. Essentially, this second edition represents the status of the nuclear fuel cycle at the end of 2002 and consists of two parts: the first part is a review of worldwide activities related to the nuclear fuel cycle; the second comprises the country profiles, reflecting each country's status with regard to nuclear fuel cycle activities. The second part incorporates a graphical representation of material flow in the nuclear fuel cycle of each country.

The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. - Provides a comprehensive and holistic review of the complete nuclear fuel cycle - Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis - Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication

Drawing on the authors' extensive experience in the processing and disposal of waste, An Introduction to Nuclear Waste Immobilisation, Second Edition examines the gamut of nuclear waste issues from the natural level of radionuclides in the environment to geological disposal of waste-forms and their long-term behavior. It covers all-important aspects of processing and immobilization, including nuclear decay, regulations, new technologies and methods. Significant focus is given to the analysis of the various matrices used, especially cement and glass, with further discussion of other matrices such as bitumen. The final chapter concentrates on the performance assessment of immobilizing materials and safety of disposal, providing a full range of the resources needed to understand and correctly immobilize nuclear waste.