Although there were many books and papers that deal with gasification, there has been only a few practical book explaining the technology in actual application and the market situation in reality. Gasification is a key technology in converting coal, biomass, and wastes to useful high-value products. Until renewable energy can provide affordable energy hopefully by the year 2030, gasification can bridge the transition period by providing the clean liquid fuels, gas, and chemicals from the low grade feedstock. Gasification still needs many upgrades and technology breakthroughs. It remains in the niche market, not fully competitive in the major market of electricity generation, chemicals, and liquid fuels that are supplied from relatively cheap fossil fuels. The book provides the practical information for researchers and graduate students who want to review the current situation, to upgrade, and to bring in a new idea to the conventional gasification technologies.

The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.

Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies

The nuclear energy company has overseen the production of its own history, focusing on programs at its laboratories in Chalk River, Ontario, and Whiteshell, Manitoba between 1943 and 1985. The 16 scientists who wrote the narrative discuss the organization and operations of the laboratories, nuclear safety and radiation protection, radioisotopes, basic research, developing the CANDU reactor, managing the radioactive wastes, business development, and revenue generation. Canadian card order number: C97-900188-9. Annotation copyrighted by Book News, Inc., Portland, OR