By their very nature, construction projects can create seemingly endless opportunities for conflict. Written by a best selling author with over 40 years of experiences in the construction and general contracting business, Construction Process Planning and Management provides you with the necessary tools to save time and money on your construction project. In this book, Sid Levy provides valuable advice for avoiding or working through the common problems that are a result of the long-term nature of construction projects, failure to select a ?project delivery system? appropriate to the project, incomplete drawing and specifications, unrealistic scheduling, poor communication and coordination among participants, and inadequate contract administration. From project genesis, through design development to contractor and contract selection, on to construction oversight, punch list and successful project close-out, this book will point out those pitfalls to avoid and offer practical advice at every step along the way. Administer the general construction process including solicitation of contractor's qualifications (pre-qualify bidders), comparative analysis of bid packages, recommendation for contract award, contract document negotiation and documentation of job change orders Provide Project Planning and on-site management and coordination of all construction projects Ensure compliance of building construction rules and regulations and collaborate with chief engineers to monitor quality of construction Conduct technical/plan review of construction documents and submit written responses identifying required corrections or changes Design, implement and oversee Company standards for construction policies, practices and processes

Focuses on the use of simulation techniques to model and evaluate repetitive construction operations. Based on the CYCLONE and MICROCYCLONE software developed by the authors and used at 38 universities nationwide, it uses a variety of examples from all areas of construction to demonstrate the application of simulation to analyze construction operations.

Organizing and administering a construction site so that the right resources get to the right place in a timely fashion demands strong leadership and a rigorous process. Good logistical operations are essential to profitability, and this book is the essential, muddy boots guide to efficient site management. Written by experienced educator-practitioners from the world-leading Building Construction Management program at Purdue University, this volume is the ultimate guide to the knowledge, skills, and abilities that need to be mastered by project superintendents. Observations about leadership imperatives and techniques are included. Organizationally, the book follows site-related activities from bidding to project closeout. Beyond outlining broad project managerial practices, the authors drill into operational issues such as temporary soils and drainage structures, common equipment, and logistics. The content is primarily geared for the manager of a domestic or small commercial building construction project, but includes some reference to public and international work, where techniques, practices, and decision making can be substantially different. The book is structured into five sections and fifteen chapters. This facilitates ready adaptation either to industry training seminars or to university courses: Section I. The Project and Site Pre-Planning: The Construction Project and Site Environment (Randy R. Rapp); Due Diligence (Robert Cox); Site Organization and Layout (James O'Connor). Section II. The Site and Field Engineering Issues: Building Layout (Douglas Keith); Soil and Drainage Issues (Yi Jiang and Randy R. Rapp). Section III. Site Logistics: Site Logistical Procedures and Administration (Daphene Koch); Earthmoving (Douglas Keith); Material Handling Equipment (Bryan Hubbard). Section IV. Leadership and Control: Leadership and Communication (Bradley L. Benhart); Health, Safety, Environment (HSE), and Security (Jeffrey Lew); Project Scheduling (James Jenkins); Project Site Controls (Joseph Orczyk); Inspection and QA/QC (James Jenkins). Section V. Planning for Completion: Site-Related Contract Claims (Joseph Orczyk); Project Closeout (Randy R. Rapp).

This handbook addresses problems facing the engineer when preparing to build, both during the contract bidding phase and after a contract has been concluded. It offers clear guidelines for planning the resources and machinery on site, as well as the safe positioning of roads, cranes, storage and temporary buildings. Site planning activities are presented here in logical sequence, offering an efficient and safe design of the construction site and of the temporary works. The book describes the process of engineering preparation of on-site construction works in all phases of the construction life-cycle, from the design phase - preparing the financial plan and procurement scheme for the owner before tendering the contract; the tendering phase; and after bid completion. A list of procedures is presented for planning the construction site in order to simplify the engineer’s work of site and temporary works planning. The Engineer’s Manual of Construction Site Planning is for all those involved in the planning of construction sites, construction managers, construction engineers and quantity surveyors, as well as for students in civil engineering and construction.

The authoritative industry guide on good practice for planning and scheduling in construction This handbook acts as a guide to good practice, a text to accompany learning and a reference document for those needing information on background, best practice, and methods for practical application. A Handbook for Construction Planning & Scheduling presents the key issues of planning and programming in scheduling in a clear, concise and practical way. The book divides into four main sections: Planning and Scheduling within the Construction Context; Planning and Scheduling Techniques and Practices; Planning and Scheduling Methods; Delay and Forensic Analysis. The authors include both basic concepts and updates on current topics demanding close attention from the construction industry, including planning for sustainability, waste, health and safety and Building Information Modelling (BIM). The book is especially useful for early career practitioners - engineers, quantity surveyors, construction managers, project managers - who may already have a basic grounding in civil engineering, building and general construction but lack extensive planning and scheduling experience. Students will find the website helpful with worked examples of the methods and calculations for typical construction projects plus other directed learning material. This authoritative industry guide on good practice for planning and scheduling in construction is written in a direct, informative style with a clear presentation enabling easy access of the relevant information with a companion website providing additional resources and learning support material. the authoritative industry guide on construction planning and scheduling direct informative writing style and clear presentation enables easy access of the relevant information companion website provides additional learning material.

A MUST-HAVE, PRACTICAL GUIDE THAT CONNECTS SCHEDULING AND CONSTRUCTION PROJECT MANAGEMENT In A Contractor’s Guide to Planning, Scheduling, and Control, an experienced construction professional delivers a unique and effective approach to the planning and scheduling responsibilities of a construction project manager, superintendent, or jobsite scheduler. The author describes the complete scheduling cycle, from preconstruction and scheduling through controls and closeout, from the perspective of real-world general contractors and scheduling professionals. Filled with tools and strategies that actually help contractors build projects, and light on academic jargon and terminology that’s not used in the field, the book includes examples of real craft workers and subcontractors, like electricians, carpenters, and drywallers, to highlight the concepts discussed within. Finally, an extensive appendix rounds out the book with references to additional resources for the reader. This comprehensive guide includes: Thorough introductions to construction contracting, lean construction planning, subcontractor management, and more A comprehensive exploration of a commercial case study that’s considered in each chapter, connecting critical topics with a consistent through line End-of-chapter review questions and applied exercises Access to a companion website that includes additional resources and, for instructors, solutions, additional case studies, sample estimates, and sample schedules Perfect for upper-level undergraduate students in construction management and construction engineering programs, A Contractor’s Guide to Planning, Scheduling, and Control is also an irreplaceable reference for general contractors and construction project management professionals.