Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

The International Working Conference on Dependable Computing for Critical Applications was the first conference organized by IFIP Working Group 10. 4 "Dependable Computing and Fault Tolerance", in cooperation with the Technical Committee on Fault-Tolerant Computing of the IEEE Computer Society, and the Technical Committee 7 on Systems Reliability, Safety and Security of EWlCS. The rationale for the Working Conference is best expressed by the aims of WG 10. 4: " Increasingly, individuals and organizations are developing or procuring sophisticated computing systems on whose services they need to place great reliance. In differing circumstances, the focus will be on differing properties of such services - e. g. continuity, performance, real-time response, ability to avoid catastrophic failures, prevention of deliberate privacy intrusions. The notion of dependability, defined as that property of a computing system which allows reliance to be justifiably placed on the service it delivers, enables these various concerns to be subsumed within a single conceptual framework. Dependability thus includes as special cases such attributes as reliability, availability, safety, security. The Working Group is aimed at identifying and integrating approaches, methods and techniques for specifying, designing, building, assessing, validating, operating and maintaining computer systems which should exhibit some or all of these attributes. " The concept of WG 10. 4 was formulated during the IFIP Working Conference on Reliable Computing and Fault Tolerance on September 27-29, 1979 in London, England, held in conjunction with the Europ-IFIP 79 Conference. Profs A. Avi~ienis (UCLA, Los Angeles, USA) and A.

Masters Theses Listed by Discipline: Aerospace Engineering. Agricultural Economics, Sciences and Engineering. Architechtural Engineering and Urban Planning. Astronomy. Astrophysics. Ceramic Engineering. Communications Engineering and Computer Science. Cryogenic Engineering. Electrical Engineering. Engineering Mechanics. Engineering Physics. Engineering Science. Fuels, Combustion, and Air Pollution. General and Environmental Engineering. Geochemistry and Soil Science. Geological Sciences and Geophysical Engineering. Geology and Earth Science. Geophysics. Industrial Engineering. Marine and Ocean Engineering. Materials Science and Engineering. Mechanical Engineering and Bioengineering. Metallurgy. Meteorology and Atmospheric Science. 17 additional disciplines. Index.

Contains articles on programming languages and their semantics, programming systems, storage allocations and garbage collection, languages and methods for writing specifications, testing and verification methods, and algorithms specifically related to the implementation of language processors.

NATO's Division of Scientific and Environmental Affairs sponsored this Advan ced Study Institute because it was felt to be timely to cover this important and challengjng subject for the first time in the framework of NATO's ASI programme. The significance of real-time systems in everyones' life is rapidly growing. The vast spectrum of these systems can be characterised by just a few examples of increasing complexity: controllers in washing machines, air traffic control systems, control and safety systems of nuclear power plants and, finally, future military systems like the Strategic Defense Initiative (SDI). The import ance of such systems for the well-being of people requires considerable efforts in research and development of highly reliable real-time systems. Furthermore, the competitiveness and prosperity of entire nations now depend on the early app lication and efficient utilisation of computer integrated manufacturing systems (CIM), of which real-time systems are an essential and decisive part. Owing to its key significance in computerised defence systems, real-time computing has also a special importance for the Alliance. The early research and development activities in this field in the 1960s and 1970s aimed towards improving the then unsatisfactory software situation. Thus, the first high-level real-time languages were defined and developed: RTL/2, Coral 66, Procol, LTR, and PEARL. In close connection with these language develop ments and with the utilisation of special purpose process control peripherals, the research on real-time operating systems advanced considerably.