This tract is based on lecture notes for a course in mechanics that has been offered at Rensselaer Polytechnic Institute on and off for the past twenty years. The course is intended to provide graduate students in mechanics with an understanding of electromagnetism and prepare them for studies on the interaction of the electric and magnetic fields with deformable solid continua. As such, it is imperative that the distinction between particle and continuum descriptions of matter be carefully made and that the distinction between that which is inherently linear and that which is intrinsically nonlinear be clearly delineated. Every possible effort has been made on my part to achieve these ends. I wish to acknowledge the contributions of a number of students and faculty who attended the lectures over the years and who, by their questions and suggestions, significantly improved some of the sections. This preface would not be complete if I did not point out that my interest in electromagnetism was initiated and my attitude towards the development of the equations was influenced by lectures given by the late Professor R.D. Mindlin at Columbia University in the late nineteen fifties. I would like to thank Professor C. Truesdell for his helpful suggestions, which I feel significantly improved the clarity and readability of the Introduction, and Dr. M.G. Ancona for his comment concerning the clarity of an important point in Sec. 1.1.

The book reviews recent research activities in applied mechanics and applied mathematics such as the fields of solid & fluid constitutive modeling for coupled fields, applications of geophysical & environmental context in judicious numerical-computational implementations. The book aims to merge foundation aspects of continuum mechanics with modern technological applications, notably on reviewing recent advances in the treated subjects in an attractive presentation accessible to a wide readership of engineering and applied sciences.

This book puts emphasis on developing the basic ideas behind the different approaches to non-equilibrium thermodynamics and on applying them to solids. After a survey about different approaches an introduction to their common fundamentals is given in the first part. In the second part the mechanical behavior of special materials such as viscoelasticity, viscoplasticity, viscoelastoplasticity, and thermoplasticity are discussed. The third part is devoted to extended thermodynamics. The basic ideas, phenomenological as well as microscopical, are reviewed and applied to thermo- and viscoelastic materials. Electromagnetic solids showing dielectric relaxation, such as ceramics, showing electromagneto-mechanical hysteresis and superconductivity are treated in the fourth part. In the last part stability with regard to constitutive equations is investigated. Especially stability of quasi-static processes and of elastic-plastic systems are discussed.

A unique resource for physicists and engineers working with magnetic fields An understanding of magnetic phenomena is essential for anyone working on the practical application of electromagnetic theory. Magnetic Fields: A Comprehensive Theoretical Treatise for Practical Use provides physicists and engineers with a thorough treatment of the magnetic aspects of classical electromagnetic theory, focusing on key issues and problems arising in the generation and application of magnetic fields. From magnetic potentials and diffusion phenomena to magnetohydrodynamics and properties of matter-topics are carefully selected for their relevance to the theoretical framework as well as current technologies. Outstanding in its organization, clarity, and scope, Magnetic Fields: * Examines a wide range of practical problems, from magnetomechanical devices to magnetic acceleration mechanisms * Opens each chapter with reference to pertinent engineering examples * Provides sufficient detail enabling readers to follow the derivation of the results * Discusses solution methods and their application to different problems * Includes more than 300 graphs, 40 tables, 2,000 numbered formulas, and extensive references to the professional literature * Reviews the essential mathematics in the appendices

Conventional books on the mechanics of materials treat elastic deformations of solids through one-dimensional models for the extension of rods, torsion of shafts and bending of beams. In functional materials, mechanical, thermal, electric and magnetic fields interact among themselves, and therefore, need a more comprehensive model.This book presents a systematic treatment of the three-dimensional theories for these coupled phenomena and the corresponding one-dimensional models for extension, torsion and bending. This book adopts a mixed approach by devoting the first half of the book to the development of the three-dimensional theories of elastic, thermal, electric and magnetic fields as well as their interactions in dielectrics, conductors and semiconductors. The remainder of the book presents the one-dimensional models for extension, torsion and bending systematically.Related Link(s)

Providing an ideal transition from introductory to advanced concepts, Electromagnetics, Second Edition builds a foundation that allows electrical engineers to confidently proceed with the development of advanced EM studies, research, and applications. This second edition of a popular text continues to offer coverage that spans the entire field, from electrostatics to the integral solutions of Maxwell’s equations. The book provides a firm grounding in the fundamental concepts of electromagnetics and bolsters understanding through the use of classic examples in shielding, transmission lines, waveguides, propagation through various media, radiation, antennas, and scattering. Mathematical appendices present helpful background information in the areas of Fourier transforms, dyadics, and boundary value problems. The second edition adds a new and extensive chapter on integral equation methods with applications to guided waves, antennas, and scattering. Utilizing the engaging style that made the first edition so appealing, this second edition continues to emphasize the most enduring and research-critical electromagnetic principles.

This textbook introduces theoretical piezoelectricity. The second edition updates a classical, seminal reference on a fundamental topic that is addressed in every materials science curriculum. It presents a concise treatment of the basic theoretical aspects of continuum modeling of electroelastic interactions in solids. The general nonlinear theory for large deformations and strong fields is established and specialized to the linear theory for small deformations and weak fields, i.e., the theory of piezoelectricity. Relatively simple and useful solutions of many static and dynamic problems of piezoelectricity that are useful in device applications are given. Emphasis is on the formulation of solutions to problems rather than advanced mathematical solution techniques. This book includes many examples to assist and enhance students’ understanding of piezoelectricity and piezoelastics.