Manufacturing industries are devoted to producing high-quality products in the most economical and timely manner. Quality, economics, and time not only indicate the customer-satisfaction level, but also measure the manufacturing per formance of a company. Today's manufacturing environments are becoming more and more complex, flexible, and information-intensive. Companies invest into the information technologies such as computers, communication networks, sensors, actuators, and other equipment that give them an abundance of information about their materials and resources. In the face of global competition, a manufacturing company's survival is becoming more dependent on how best this influx of in formation is utilized. Consequently, there evolves a great need for sophisticated tools of performance analysis that use this information to help decision makers in choosing the right course of action. These tools will have the capability of data analysis, modeling, computer simulation, and optimization for use in designing products and processes. International competition also has had its impact on manufacturing education and the government's support of it in the US. We see more courses offered in this area in industrial engineering and manufacturing systems engineering departments, operations research programs, and business schools. In fact, we see an increasing number of manufacturing systems engineering departments and manufacturing research centers in universities not only in the US but also in Europe, Japan, and many developing countries.

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.

The international initiative on Enterprise Inter- and Intra-Organisational Integration (EI3-IC) had the objective to increase both international consen sus (IC) and public awareness on enterprise integration. In these proceedings we intend to present the current status in inter- and intra-organisational inte gration for electronic commerce and thereby to further increase awareness and consensus within academia and industry about enterprise inter-and intra organisational integration. The conference proceedings contain the papers presented at the ICEIMT conference in Valencia, Spain, selected papers presented at the different workshops and three papers on the initiative itself: overview, history and results. The proceedings follow the conference structure with each section (Parts 2 to 5) starting with the workgroup reports, followed by a particular view on the section theme and additional papers either presented at the con ference or during the related workshop. Section editorials discuss the differ ent contributions. As stated in the paper by Nell and Goranson in section 1 the results from all workshops indicate the important role of business processes in the area of e-commerce and virtual enterprises. Sharing relevant knowledge between co operating partners and making it available for decision support at all levels of management and across organisational boundaries will significantly en hance the trust between the partners on the different levels of partner opera tions (strategy, policy, operation and transaction). Clearly business process modelling can significantly enhance establishment, operation and decom mission of the required collaboration.

Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.

Analysis and Modeling of Manufacturing Systems is a set of papers on some of the newest research and applications of mathematical and computational techniques to manufacturing systems and supply chains. These papers deal with fundamental questions (how to predict factory performance: how to operate production systems) and explicitly treat the stochastic nature of failures, operation times, demand, and other important events. Analysis and Modeling of Manufacturing Systems will be of interest to readers with a strong background in operations research, including researchers and mathematically sophisticated practitioners.

To date, reconfigurable manufacturing systems (RMSs) are among the most effective manufacturing styles that can offer manufacturers an alternative way of facing up to the challenges of continual changes in production requirements within the global, competitive and dynamic manufacturing environments. However, availability of optimal process plans that are suitable for reconfigurable manufacturing is one of the key enablers - yet to be fully unlocked - for realizing the full benefits of true RMSs. To unlock the process planning key and advance the state of art of reconfigurable manufacturing in the manufacturing industry, a number of questions need to be answered: (i) what decision making models and (ii) what computational techniques, can be applied to provide optimal manufacturing process planning solutions that are suitable for logical reconfiguration in manufacturing systems? To answer these questions, you must understand how to model reconfigurable manufacturing activities in an optimization perspective. You must also understand how to develop and select appropriate optimization techniques for solving process planning problems in manufacturing systems. To this end, Process Planning Optimization in Reconfigurable Manufacturing Systems covers: the design and operation of RMSs, optimal process planning modelling for reconfigurable manufacturing and the design and implementation of heuristic algorithm design techniques. The author explores how to: model optimization problems, select suitable optimization techniques, develop optimization algorithms, comparatively analyze the performance of candidate metaheuristics and how to investigate the effects of optimal process planning solutions on operating levels in manufacturing systems. This book delineates five alternative heuristic algorithm design techniques based on simulated annealing, genetic algorithms and the boltzmann machine that are tasked to solve manufacturing process planning optimization problems in RMSs. After reading this book, you will understand: how a reconfigurable manufacturing system works, the different types of manufacturing optimization problems associated with reconfigurable manufacturing, as well as the conventional and intelligent techniques that are suitable for solving process planning optimization problems. You will also be able to develop and implement effective optimization procedures and algorithms for a wide spectrum of optimization problems in design and reconfigurable manufacturing."