Wide area monitoring, protection and control systems (WAMPACs) have been recognized as the most promising enabling technologies to meet challenges of modern electric power transmission systems, where reliability, economics, environmental and other social objectives must be balanced to optimize the grid assets and satisfy growing electrical demand. To this aim WAMPAC requires precise phasor and frequency information, which are acquired by deploying multiple time synchronized sensors, known as Phasor Measurement Units (PMUs), providing precise synchronized information about voltage and current phasors, frequency and rate-of-change-of-frequency.

Protection of Modern Power Systems Familiarize yourself with the cutting edge of power system protection technology All electrical systems are vulnerable to faults, whether produced by damaged equipment or the cumulative breakdown of insulation. Protection from these faults is therefore an essential part of electrical engineering, and the various forms of protection that have developed constitute a central component of any course of study related to power systems. Particularly in recent decades, however, the demands of decarbonization and reduced dependency on fossil fuels have driven innovation in the field of power systems. With new systems and paradigms come new kinds of faults and new protection needs, which promise to place power systems protection once again at the forefront of research and development. Protection of Modern Power Systems offers the first classroom-ready textbook to fully incorporate developments in renewable energy and ‘smart’ power systems into its overview of the field. It begins with a comprehensive guide to the principles of power system protection, before surveying the systems and equipment used in modern protection schemes, and finally discussing new and emerging protection paradigms. It promises to become the standard text in power system protection classrooms. Protection of Modern Power Systems readers will also find: Treatment of the new faults and protection paradigms produced by the introduction of new renewable generators Discussion of SmartGrids—intelligently-controlled active systems designed to integrate renewable energy into the power system—and their protection needs Detailed exploration of Synchronized Measurement Technology and Intelligent Electronic Devices Accompanying website to include Solutions Manual for instructors Protection of Modern Power Systems is an essential resource for students, researchers, and system engineers looking for a working knowledge of this critical subject.

The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

This book presents a comprehensive set of guidelines and applications of DIgSILENT PowerFactory, an advanced power system simulation software package, for different types of power systems studies. Written by specialists in the field, it combines expertise and years of experience in the use of DIgSILENT PowerFactory with a deep understanding of power systems analysis. These complementary approaches therefore provide a fresh perspective on how to model, simulate and analyse power systems. It presents methodological approaches for modelling of system components, including both classical and non-conventional devices used in generation, transmission and distribution systems, discussing relevant assumptions and implications on performance assessment. This background is complemented with several guidelines for advanced use of DSL and DPL languages as well as for interfacing with other software packages, which is of great value for creating and performing different types of steady-state and dynamic performance simulation analysis. All employed test case studies are provided as supporting material to the reader to ease recreation of all examples presented in the book as well as to facilitate their use in other cases related to planning and operation studies. Providing an invaluable resource for the formal instruction of power system undergraduate/postgraduate students, this book is also a useful reference for engineers working in power system operation and planning.

The ubiquitous digital transformation also influences power system operation. Emerging real-time applications in information (IT) and operational technology (OT) provide new opportunities to address the increasingly demanding power system operation imposed by the progressing energy transition. This IT/OT convergence is epitomised by the novel Digital Twin (DT) concept. By integrating sensor data into analytical models and aligning the model states with the observed system, a power system DT can be created. As a result, a validated high-fidelity model is derived, which can be applied within the next generation of energy management systems (EMS) to support power system operation. By providing a consistent and maintainable data model, the modular DT-centric EMS proposed in this work addresses several key requirements of modern EMS architectures. It increases the situation awareness in the control room, enables the implementation of model maintenance routines, and facilitates automation approaches, while raising the confidence into operational decisions deduced from the validated model. This gain in trust contributes to the digital transformation and enables a higher degree of power system automation. By considering operational planning and power system operation processes, a direct link to practice is ensured. The feasibility of the concept is examined by numerical case studies.

Modern optimization approaches have attracted an increasing number of scientists, decision makers, and researchers. As new issues in this field emerge, different optimization methodologies must be developed and implemented. The Handbook of Research on Emergent Applications of Optimization Algorithms is an authoritative reference source for the latest scholarly research on modern optimization techniques for solving complex problems of global optimization and their applications in economics and engineering. Featuring coverage on a broad range of topics and perspectives such as hybrid systems, non-cooperative games, and cryptography, this publication is ideally designed for students, researchers, and engineers interested in emerging developments in optimization algorithms.

Decision Making Applications in Modern Power Systems presents an enhanced decision-making framework for power systems. Designed as an introduction to enhanced electricity system analysis using decision-making tools, it provides an overview of the different elements, levels and actors involved within an integrated framework for decision-making in the power sector. In addition, it presents a state-of-play on current energy systems, strategies, alternatives, viewpoints and priorities in support of decision-making in the electric power sector, including discussions of energy storage and smart grids. As a practical training guide on theoretical developments and the application of advanced methods for practical electrical energy engineering problems, this reference is ideal for use in establishing medium-term and long-term strategic plans for the electric power and energy sectors. - Provides panoramic coverage of state-of-the-art energy systems, strategies and priorities in support of electrical power decision-making - Introduces innovative research outcomes, programs, algorithms and approaches to address challenges in understanding, creating and managing complex techno-socio-economic engineering systems - Includes practical training on theoretical developments and the application of advanced methods for realistic electrical energy engineering problems