This book provides technical information on well completion, from drilling in the pay zone to production start-up. It also covers the main methods for artificial lift, and well servicing. The reader will find a discussion of the concepts and equipment that are indispensable for scheduling and designing completion and servicing operations. The book's chief objective is to provide comprehensive information to those who require a thorough understanding of the completion engineer's aims and the resources he needs for oil field development and production. It is particularly well-suited to the needs of the specialist whose field of activity is located upstream from oil and gas production, e.g., geologists, geophysicists, and reservoir, drilling or production facility engineers. It should also be of use to oil company administrative personnel, including those in management, and those in the insurance and legal departments. The text is fully illustrated, thus helping the reader grasp the basics of this highly technical field.Contents: 1. Introduction to completion. 1.1. Main factors influencing completion design. 1.2. Overall approach to a well's flow capacity. 1.3. Major types of completion configurations. 1.4. Main phases in completion. 2. Connecting the pay zone and the borehole. 2.1. Drilling and casing the pay zone. 2.2. Evaluating and restoring the cement job. 2.3. Perforating. 2.4. Treating the pay zone. 2.5. The special case of horizontal wells. 3. The equipment of naturally flowing wells. 3.1. General configuration of flowing well equipment. 3.2. The production wellhead. 3.3. The production string or tubing. 3.4. Packers. 3.5. Downhole equipment. 3.6. Subsurface safety valves. 3.7. Running procedure. 4. Artificial lift. 4.1. Pumping. 4.2. Gas lift. 4.3. Choosing an artificial lift process. 5. Well servicing and workover. 5.1. Main types of operations. 5.2. Light operations on live wells. 5.3. Heavy operations on live wells. 5.4. Operations on killed wells. 5.5. Special cases. Bibliography. Index.

Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components

This manual replaces A Primer of Oilwell Service and Workover and has been totally updated, expanded, and renamed because it has been changed so much. It remains, however, a basic reader of the well servicing industry, and tells the story in a simple, easy-to-understand manner. Profusely illustrated, it covers such items as reservoir drive mechanisms, completion methods, artificial lift, well servicing equipment, fishing, and workover techniques. Anyone who needs a fundamental overview of well servicing, workover, and completion will find this book helpful. An extensive glossary is included.

Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour

Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.