"Perhaps no other advancement of public health has been as significant. Yet, few know the intriguing story of a simple idea-disinfecting public water systems with chlorine-that in just 100 years has saved more lives than any other single health development in human history. At the turn of the 20th century, most scientists and doctors called the addition of chloride of lime, a poisonous chemical, to public water supplies not only a preposterous idea but also an illegal act - until a courageous physician, Dr. John L. Leal, working with George W. Fuller, the era's greatest sanitary engineer, proved it could be done safely and effectively on a large scale. This is the first book to tell the incredible true story of the first use of chlorine to disinfect a city water supply, in Jersey City, New Jersey, in 1908. This important book also corrects misinformation long-held in the historical record about who was responsible for this momentous event, giving overdue recognition to the true hero of the story-an unflagging champion of public health, Dr. John L. Leal."--Back cover.

Includes bibliographical references and index.

The EPA has established regulations which classify four types of disinfection byproducts - TTHMs, haloacetic acids, bromate, and chlorite - and requires public water systems limit these byproducts to specific levels. Most of the information required to comply with these standards is either scattered throughout the literature or derived from confere

Water is our natural heritage, our miracle of life. However, our increasingly technological society has become indifferent to water. Far from being pure, modern drinking water around the world contains many undesirable chemical and bacterial contaminants. The existing techniques employed for the disinfection of water are either energy-intensive or

Water Purification, a volume in the Nanotechnology in the Food Industry series, provides an in-depth review of the current technologies and emerging application of nanotechnology in drinking water purification, also presenting an overview of the common drinking water contaminants, such as heavy metals, organics, microorganisms, pharmaceuticals, and their occurrences in drinking water sources. As the global water crisis has motivated the industry to look for alternative water supplies, nanotechnology presents significant potential for utilizing previously unacceptable water sources. This books explores the practical methodologies for transforming water using nanotechnologies, and is a comprehensive reference to a wide audience of food science research professionals, professors, and students who are doing research in this field. - Includes the most up-to-date information on nanotechnology applications and research methods for water purification and treatment - Presents applications of nanotechnology and engineered nanomaterials in drinking water purification to improve efficiency and reduce cost - Provides water purification research methods that are important to water quality, including precipitation, adsorption, membrane separation, and ion exchange - Covers the potential risks of nanotechnology, such as the toxicological effects of engineered nanomaterials in water and how to minimize risks based on research studies

Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.

Water is our natural heritage, our miracle of life. However, our increasingly technological society has become indifferent to water. Far from being pure, modern drinking water around the world contains many undesirable chemical and bacterial contaminants. The existing techniques employed for the disinfection of water are either energy-intensive or have by-products harmful to human health. Drinking Water Disinfection Techniques reviews these processes and explores novel technologies for water disinfection synergistic with existing techniques. The book covers a wide audience and gives a comprehensive review of various physical, chemical, and hybrid techniques commonly used for the disinfection of water as well as newer emerging technologies in terms of their mode of action, scale of operation, efficacy, merits, and demerits. It broadly addresses the issues related to water disinfection in three sections: Disinfection techniques—chemical, physical, and hybrid (combination)—and their likely scale of operation efficacy Disinfection by-product as a function of water source and the type of treatment Emerging and novel techniques, including new work on cavitation, an economical, energy-efficient, and simple alternative to the conventional methods of disinfection Drinking Water Disinfection Techniques effectively combines the chemical, physical, biological, and engineering principles of water disinfection in one text. Discussing both conventional and novel techniques used for disinfection and the economics involved, the book gives a comprehensive review of various physical, chemical, and hybrid techniques used for disinfection to create potable water.