The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.

LRFD Steel Design Using Advanced Analysis uses practical advanced analysis to produce almost identical member sizes to those of the Load and Resistance Factor Design (LRFD) method. The main advantage of the advanced analysis method is that tedious and sometimes confusing separate member capacity checks encompassed by the AISC-LRFD specification equations are not necessary. Advanced analysis can sufficiently capture the limit state strength and stability of a structural system and its individual member directly. While the use of elastic analysis is still the norm in engineering practice, a new generation of codes is expected to adopt the advanced analysis methodology in the near future, leading to significant savings in design effort. In recent years, the continued rapid development in computer hardware and software, coupled with an increased understanding of structural behavior, has made it feasible to adopt the advanced analysis techniques for design office use. Drs. Chen and Kim, both experienced and respected engineers, contribute their expertise to this text, which is intended for both the graduate student and the practicing engineer. Previous knowledge of the subject is not necessary, but familiarity with methods of elastic analysis and conventional LRFD design is expected. The advanced analysis in the book is presented in a practical and simple manner, with attention directed to both analysis and design, emphasizing the direct use of the methods in engineering practice. This is a great introduction to an exciting new trend in structural engineering!

The fully revised fourth edition of this successful textbook fills a void which will arise when British designers start using the European steel code EC3 instead of the current steel code BS5950. The principal feature of the forth edition is the discussion of the behaviour of steel structures and the criteria used in design according to the British version of EC3. Thus it serves to bridge the gap which too often occurs when attention is concentrated on methods of analysis and the sizing of structural components. Because emphasis is placed on the development of an understanding of behaviour, many analytical details are either omitted in favour of more descriptive explanations, or are relegated to appendices. The many worked examples both illustrate the behaviour of steel structures and exemplify details of the design process. The Behaviour and Design of Steel Structures to EC3 is a key text for senior undergraduate and graduate students, and an essential reference tool for practising structural engineers in the UK and other countries.

The third edition of this successful textbook is concerned specifically with the design of steel structures to the British Standard BS 5950. Thoroughly revised and updated in accordance with the latest 2000 amendment to Part 1 of the standard, it discusses all aspects of the behaviour of steel structures, and criteria used in their design. With copious worked examples, The Behaviour and Design of Steel Structures to BS 5950 is an ideal course textbook for senior undergraduate students, and will also provide a useful reference source for the practising engineer.

The behaviour of steel structures and the criteria used in their design are set out in detail in this book. The book bridges the gap between the methods of analysis and the sizing of structural components. The basis of the limit state design criteria of the latest Australian code for structural steel are explained, and the reader is pointed to the relevant provisions of the code.

In our world of seemingly unlimited computing, numerous analytical approaches to the estimation of stress, strain, and displacement-including analytical, numerical, physical, and analog techniques-have greatly advanced the practice of engineering. Combining theory and experimentation, computer simulation has emerged as a third path for engineering

This book is a personal anthology of the author's utmost academic works and accomplishments with his former students and colleagues intended as an enduring record for the engineering community for many years to come.The author's forty-year professional career and academic life journey is first briefly sketched in Chapter 1 and more details are elaborated in three chapters that follow: Chapter 2: The first ten years at Lehigh — beginning to show; Chapter 3: Twenty=three years at Purdue — the highly productive years; and Chapter 4: seven years at UH — the pursuit of excellence. The author's specific academic contributions are documented in the following three chapters: Chapter 5: 23 academic bulletins are selected to highlight his 10 major research areas; Chapter 6: 23 Academic masterpiece books are listed along with their respective peer review comments; and Chapter 7: academic publications include journal articles, conference proceedings and symposiums, and lectures and keynotes. The book ends with the listing of all the author's 55 doctoral students' dissertation titles in Chapter 8.In 1975 at Lehigh, the author published a milestone treatise on Limit Analysis and Soil Plasticity. In 1982 at Purdue, he published another pioneering work on Plasticity in Reinforced Concrete.In September 1999, the author was recruited by UH to take the Deanship of the College of Engineering to accomplish the noble mission: to build the College to become one of the top 50 engineering schools by strengthening the faculty, improving the facilities, and increasing the enrollment. Over his seven years at UH, a lot of progress was made in all these three areas — the research program expanded, facilities improved, and enrollment increased.