The Department of Toxic Substances Control (DTSC) of the State of California Environmental Protection Agency is in the process of complying with the Regulatory Structure Update. The Regulatory Structure Update is a comprehensive review and refocusing of California's system for identifying and regulating management of hazardous wastes. As part of this effort, the DTSC proposes to change its current waste classification system that categorizes wastes as hazardous or nonhazardous based on their toxicity. Under the proposed system there would be two risk-based thresholds rather than the single toxicity threshold currently used to distinguish between the wastes. Wastes that contain specific chemicals at concentrations that exceed the upper threshold will be designated as hazardous; those below the lower threshold will be nonhazardous; and those with chemical concentrations between the two thresholds will be "special" wastes and subject to variances for management and disposal. The proposed DTSC system combines toxicity information with short or long-term exposure information to determine the risks associated with the chemicals. Under section 57004 of the California Health and Safety Code, the scientific basis of the proposed waste classification system is subject to external scientific peer review by the National Academy of Sciences, the University of California, or other similar institution of higher learning or group of scientists. This report addresses that regulatory requirement.

Hazardous waste management is a complex, interdisciplinary field that continues to grow and change as global conditions change. Mastering this evolving and multifaceted field of study requires knowledge of the sources and generation of hazardous wastes, the scientific and engineering principles necessary to eliminate the threats they pose to people and the environment, the laws regulating their disposal, and the best or most cost-effective methods for dealing with them. Written for students with some background in engineering, this comprehensive, highly acclaimed text does not only provide detailed instructions on how to solve hazardous waste problems but also guides students to think about ways to approach these problems. Each richly detailed, self-contained chapter ends with a set of discussion topics and problems. Case studies, with equations and design examples, are provided throughout the book to give students the chance to evaluate the effectiveness of different treatment and containment technologies.

Assuming no previous knowledge, this second edition provides comprehensive coverage for a first course in hazardous waste management for civil, environmental engineers, and managers. The update includes material on the new USEPA revisions to the Solid and Hazardous Waste Regulations and the new e-Manifest Rule. It is written primarily for generators of hazardous waste with a primary emphasis on source reduction, waste minimization, reuse, and recycling before waste disposal. Numerous case studies from the field and clarification of regulations simplify this complex topic. The book provides guidance on how to determine the proper category of hazardous waste generators, with separate and distinct sets of requirements for the three different categories of generators, and gives basic supplemental guidance for transporters, storage, and disposal facilities. It covers proper completion of hazardous waste manifests and reports. The book explains record keeping, personnel training, and other requirements necessary to be in full compliance on inspections. A companion CD with regulatory forms, data is included. FEATURES: • Provides numerous, field case studies and clarification of new regulations to simplify this complex topic • Includes material on the new USEPA revisions to the Solid and Hazardous Waste Regulations and the new e-Manifest Rule • Covers all the major government regulations from inception to current practice • Explains record keeping, personnel training, and requirements necessary for full compliance on inspections • Includes companion CD with regulatory forms, data Selected Topics: Introductory history and overview of hazardous waste management laws, rules and regulations; a practical guide to complying with the regulations, including the identification of hazardous wastes; proper management of these wastes on-site; preparing generator annual reports, manifests, personnel safety training; hazardous waste management training for staff; proper record-keeping for future regulatory inspections.

Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.