Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.

Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.

This book provides users, pump manufactures, engineers, researchers and students with extensive information about pump’s behavior in reverse operation. It reports on cutting-edge methods for selecting the proper PAT and improving PAT’s efficiency, discusses PAT’s reliability, economic issues and environmental impact as well. The book describes in detail electromechanical equipment of PAT systems, their installation and operation, and gives important practical insight into the use of PAT in water transmission and distribution systems, as part of thermal power plants and cooling systems, in oil distribution systems and other systems as well. It reports on different types on PAT control modes as well as on numerical methods useful for PAT analysis and implementation. All in all, the book represents a comprehensive practice-oriented reference-guide to design engineers, as well as PAT general users and manufactures. It also provides researchers with extensive technical information on the use of PAT thus fostering new discussions and ideas to improve current methods and cope with future challenges.

further chapters cover specific aspects of turbine types for hydro, not previously covered thoroughly by published material new title for successful Planning & Installing series

This is a guide to the use of induction motors for electricity generation in remote locations. It is written as a practical handbook for engineers and technicians involved in designing and installing small water-power schemes for isolated houses and communities. This revised edition brings in new concepts developed and tested to expand the power range of application of motors as generators, to make this technology safer and more reliable, while keeping costs low and making it accessible to developing countries. It also contains a new chapter on mains-connecting micro-hydro generators. This edition also draws on the practical experience of manufacturers and installers of induction generator units working in village locations in a large number of countries, among them Sri Lanka, Nepal, Peru, Kenya and others.