Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.

David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.

The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.

The world's output of metals during the 100 year period of 1863-1963 was greater than in all the previous years of man's history. In the nineteenth century the only metals available to industry were cast and wrought iron and a few non-ferrous metals and their alloys; by the latter part of the twentieth century, steel and aluminum dominated the world, and metals that were mere laboratory curiosities provided the basis for the technology of nuclear energy and space travel. This book records the extraordinary history of metallurgical progress, in which metal art was replaced by metal science. It remains a classic work on the subject. The book begins with an introductory chapter that surveys the entire field to be covered, and follows with eight chapters each dealing with progress in one of the major branches of the metallurgical industry: ore dressing, pyrometallurgy, iron and steel, the major non-ferrous metals, new metals (such as uranium, germanium and cobalt), precious metals, the shaping of metals, and metallography. The book reviews developments in all countries, but American practice - which led the world - is given special prominence. A glossary of metallurgical terms and full name and subject indexes are included. The book is a basic reference work as well as an absorbing history of an important aspect of man's technological progress.