The AVR microcontroller from Atmel (now Microchip) is one of the most widely used 8-bit microcontrollers. Arduino Uno is based on AVR microcontroller. It is inexpensive and widely available around the world. This book combines the two. In this book, the authors use a step-by-step and systematic approach to show the programming of the AVR chip. Examples in both Assembly language and C show how to program many of the AVR features, such as timers, serial communication, ADC, SPI, I2C, and PWM. The text is organized into two parts: 1) The first 6 chapters use Assembly language programming to examine the internal architecture of the AVR. 2) Chapters 7-18 uses both Assembly and C to show the AVR peripherals and I/O interfacing to real-world devices such as LCD, motor, and sensor. The first edition of this book published by Pearson used ATmega32. It is still available for purchase from Amazon. This new edition is based on Atmega328 and the Arduino Uno board. The appendices, source codes, tutorials and support materials for both books are available on the following websites: http: //www.NicerLand.com/ and http: //www.MicroDigitalEd.com/AVR/AVR_books.htm

The AVR Microcontroller and Embedded Systems: Using Assembly and C features a step-by-step approach in covering both Assembly and C language programming of the AVR family of Microcontrollers. It offers a systematic approach in programming and interfacing of the AVR with LCD, keyboard, ADC, DAC, Sensors, Serial Ports, Timers, DC and Stepper Motors, Opto-isolators, and RTC. Both Assembly and C languages are used in all the peripherals programming. In the first 6 chapters, Assembly language is used to cover the AVR architecture and starting with chapter 7, both Assembly and C languages are used to show the peripherals programming and interfacing. For courses in Embedded System Design, Microcontroller's Software and Hardware, Microprocessor Interfacing, Microprocessor Assembly Language Programming, Peripheral Interfacing, Senior Project Design, Embedded System programming with C.

The STM32F103 microcontroller from ST is one of the widely used ARM microcontrollers. The blue pill board is based on STM32F103 microcontroller. It has a low price and it is widely available around the world. This book uses the blue pill board to discuss designing embedded systems using STM32F103. In this book, the authors use a step-by-step and systematic approach to show the programming of the STM32 chip. Examples show how to program many of the STM32F10x features, such as timers, serial communication, ADC, SPI, I2C, and PWM.To write programs for Arm microcontrollers you need to know both Assembly and C languages. So, the text is organized into two parts:1) The first 6 chapters cover the Arm Assembly language programming.2) Chapters 7-19 uses C to show the STM32F10x peripherals and I/O interfacing to real-world devices such as keypad, 7-segment, character and graphic LCDs, motor, and sensor.The source codes, power points, tutorials, and support materials for the book is available on the following website: http: //www.NicerLand.co

Atmel's AVR microcontrollers are the chips that power Arduino, and are the go-to chip for many hobbyist and hardware hacking projects. In this book you'll set aside the layers of abstraction provided by the Arduino environment and learn how to program AVR microcontrollers directly. In doing so, you'll get closer to the chip and you'll be able to squeeze more power and features out of it. Each chapter of this book is centered around projects that incorporate that particular microcontroller topic. Each project includes schematics, code, and illustrations of a working project. Program a range of AVR chips Extend and re-use other people’s code and circuits Interface with USB, I2C, and SPI peripheral devices Learn to access the full range of power and speed of the microcontroller Build projects including Cylon Eyes, a Square-Wave Organ, an AM Radio, a Passive Light-Sensor Alarm, Temperature Logger, and more Understand what's happening behind the scenes even when using the Arduino IDE

Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

This book introduces basic programming of ARM Cortex chips in assembly language and the fundamentals of embedded system design. It presents data representations, assembly instruction syntax, implementing basic controls of C language at the assembly level, and instruction encoding and decoding. The book also covers many advanced components of embedded systems, such as software and hardware interrupts, general purpose I/O, LCD driver, keypad interaction, real-time clock, stepper motor control, PWM input and output, digital input capture, direct memory access (DMA), digital and analog conversion, and serial communication (USART, I2C, SPI, and USB).

Offering comprehensive, cutting-edge coverage, THE ATMEL AVR MICROCONTROLLER: MEGA AND XMEGA IN ASSEMBLY AND C delivers a systematic introduction to the popular Atmel 8-bit AVR microcontroller with an emphasis on the MEGA and XMEGA subfamilies. It begins with a concise and complete introduction to the assembly language programming before progressing to a review of C language syntax that helps with programming the AVR microcontroller. Emphasis is placed on a wide variety of peripheral functions useful in embedded system design. Vivid examples demonstrate the applications of each peripheral function, which are programmed using both the assembly and C languages.