Natural Fiber-Reinforced Biodegradable and Bioresorbable Polymer Composites focuses on key areas of fundamental research and applications of biocomposites. Several key elements that affect the usage of these composites in real-life applications are discussed. There will be a comprehensive review on the different kinds of biocomposites at the beginning of the book, then the different types of natural fibers, bio-polymers, and green nanoparticle biocomposites are discussed as well as their potential for future development and use in engineering biomedical and domestic products. Recently mankind has realized that unless the environment is protected, he himself will be threatened by the over consumption of natural resources as well as a substantial reduction in the amount of fresh air produced in the world. Conservation of forests and the optimal utilization of agricultural and other renewable resources like solar, wind, and tidal energy, have become important topics worldwide. With such concern, the use of renewable resources—such as plant and animal-based, fiber-reinforced polymeric composites—are now becoming an important design criterion for designing and manufacturing components for a broad range of different industrial products. Research on biodegradable polymeric composites can contribute, to some extent, to a much greener and safer environment. For example, in the biomedical and bioengineering fields, the use of natural fiber mixed with biodegradable and bioresorbable polymers can produce joint and bone fixtures to alleviate pain in patients. - Includes comprehensive information about the sources, properties, and biodegradability of natural fibers - Discusses failure mechanisms and modeling of natural fibers composites - Analyzes the effectiveness of using natural materials for enhancing mechanical, thermal, and biodegradable properties

Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. - Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials - Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers - Covers both traditional and novel manufacturing technologies for high strength natural fiber composites - Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies - Presents contributions from leading international experts in the field

Materials Selection for Natural Fiber Composites covers the use of various tools and techniques that can be applied for natural fiber composite selection to expand the sustainable design possibilities and support cleaner production requirements. These techniques include the analytical hierarchy process, knowledge-based system, Java based materials selection system, artificial neural network, Pugh selection method, and the digital logic technique. Information on related topics, such as materials selection and design, natural fiber composites, and materials selection for composites are discussed to provide background information to the main topic. Current developments in selecting the natural fiber composite material system, including the natural fiber composites and their constituents (fibers and polymers) is the main core of the book, with in detailed sections on various technical, environmental and economic issues to enhance both environmental indices and the industrial sustainability theme. Recent developments on the analytical hierarchy process in natural fiber composite materials selection, materials selection for natural fiber composites, and knowledge based system for natural fiber composite materials selection are also discussed. - Focuses on materials selection for natural fiber composites - Covers potential tools and techniques, such as analytical hierarchy process, knowledge-based systems, Java-based materials selection system, artificial neural network, the Pugh selection method and digital logic technique - Contains contributions from leading experts in the field

Carbon and glass fibre reinforced composite materials have been used for many years in several different types of applications. However, these conventional composites are derived from non-renewable reinforcements and they pose a significant threat to the environment. Government legislation and consumer behaviour have recently forced many industries to adapt sustainable composites. Industries such as automotive, marine and aerospace are now seeking sustainable lightweight composites with the aim to reduce the overall weight of the components with enhanced materials and design aspects. Therefore, there is high demand on research for the development of sustainable lightweight composites. This book presents a comprehensive review of lightweight composites with the central aim to increase their use in key industrial sectors such as automotive, marine and aerospace. There is no such book currently available that is dedicated to sustainable lightweight applications covering important topics such as key drivers for lightweight composites, mechanical properties, damage characterisation, durability and environmental aspects. Key topics that are addressed include: - The roles of reinforcements and matrices in composite materials - Sustainable natural fibre reinforcements and their morphological structures - Lightweight applications and properties requirements - Design, manufacturing processes and their effects on properties - Testing and damage characterisation of composite materials - Sustainable composites and techniques for property enhancement - Future trends and challenges for sustainable composites in lightweight applications It will be a valuable reference resource for those working in material Science, polymer science, materials engineering, and industries involved in the manufacture of automotive and aerospace components from lightweight composite materials. - Provides a comprehensive review of sustainable lightweight composites looking at key industrial applications such as automotive, marine, and aerospace and construction - Important relationships between structure and properties are analysed in detail - Enhancement of properties through hybrid systems, are also explored with emphasis on design, materials selection and manufacturing techniques

Concern about global warming has led to renewed interest in the more sustainable use of natural fibres in composite materials. This important book reviews the wealth of recent research into improving the mechanical properties of natural-fibre thermoplastic composites so that they can be more widely used.The first part of the book provides an overview of the main types of natural fibres used in composites, how they are processed and, in particular, the way the fibre-matrix interface can be engineered to improve performance. Part two discusses the increasing use of natural-fibre composites in such areas as automotive and structural engineering, packaging and the energy sector. The final part of the book discusses ways of assessing the mechanical performance of natural-fibre composites.With its distinguished editor and team of contributors, Properties and performance of natural-fibre composites is a valuable reference for all those using these important materials in such areas as automotive and structural engineering. - Provides an overview of the types of natural fibres used in composites - Discusses fibre-matrix interface and how it can be engineered to improve performance - Examines the increasing use of natural-fibre composites in automotive and structural engineering and the packaging and energy sector

Sustainable Composites for Aerospace Applications presents innovative advances in the fabrication, characterization and applications of LDH polymer nanocomposites. It covers fundamental structural and chemical knowledge and explores various properties and characterization techniques, including microscopic, spectroscopic and mechanical behaviors. Users will find a strong focus on the potential applications of LDH polymer nanocomposites, such as in energy, electronics, electromagnetic shielding, biomedical, agricultural, food packaging and water purification functions. This book provides comprehensive coverage of cutting-edge research in the field of LDH polymer nanocomposites and future applications, and is an essential read for all academics, researchers, engineers and students working in this area. - Presents fundamental knowledge of LDH polymer nanocomposites, including chemical composition, structural features and fabrication techniques - Provides an analytical overview of the different types of characterization techniques and technologies - Contains extensive reviews on cutting-edge research for future applications in a variety of industries

Global awareness of environmental issues has resulted in the emergence of economically and environmentally friendly bio-based materials free from the traditional side effects of synthetics. This book delivers an overview of the advancements made in the development of biorenewable resources-based materials, including processing methods and potential applications in bio-based green composites. Covering various kinds of cellulosic biofibers, the text provides information on more eco-friendly and sustainable alternatives to synthetic polymers and discusses the present state and growing utility of green materials from natural resources.