This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.

Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components

An Introduction to Surface Alloying of Metals aims to serve as a primer to the basic aspects of surface alloying of metals. The book serves to elucidate fundamentals of surface modification and their engineering applications. The book starts with basics of surface alloying and goes on to cover key surface alloying methods, such as carburizing, nitriding, chromizing, duplex treatment and the characterization of surface layers. The book will prove useful to students at both the undergraduate and graduate levels, as also to researchers and practitioners looking for a quick introduction to surface alloying.

Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering

This reference presents comprehensive information about laser surface treatments for tribological applications. Chapters of the book highlight the importance of laser technology in modifying materials to optimize the effects of friction and lubrication, by explaining a range of surface modification methods used in industries. These methods include hardening, melting, alloying, cladding and texturing. The knowledge in the book is intended to give an in-depth understanding about the role of laser technology in tribology and the manufacture of industrial materials and surfaces for special applications. Key Features: - 10 chapters on topics relevant to tribology and industrial applications of laser material processing - Comprehensively covers laser surface modification of metals and alloys - Explains a wide range of surface modification methods (hardening, melting, alloying, cladding and texturing) - Covers material and tribological characterization of surfaces - Presents information in a simple structured layout for easy reading, with introductory notes for learners - Provides references for further reading This book is an ideal reference for students and learners in courses related to engineering, manufacturing and materials science. Researchers, industrial professionals and general readers interested in laser assisted machining processes and surface modification techniques will also find the book to be an informative reference on the subject.

The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties.Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications.With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. - Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties - Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying - Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft