The ELOISATRON (ELN) Project aims at a future proton supercollider with 100-500 TeV energy per beam and 1034-1036 cm-2s-1 luminosity. While the Large Hadron Collider (LHC) is being implemented at CERN, it is very timely to study the feasibility of the next generation of hadron colliders at the extreme limits of energy and luminosity. In this respect, the achievement of extremely high magnetic fields and the production of accelerating rf cavities with very low losses are a crucial point in the actual construction design of such a collider. The search for superconducting materials with suitable properties to be used in this field has gained a new impulse after the discovery of the so-called high temperature superconducting compounds (HTSCs) with superconducting critical temperatures higher than 100 K. Besides the critical temperatures, the transport performances of this class of compounds are still very far from allowing applications in extremely high energy colliders. On the other hand, in the last few years, the technological and scientific improvements obtained for both the HTSCs and the conventional superconducting materials are very promising.This book reviews the recent status of R&D on the rising generation of superconducting materials for accelerator magnets and cavities, and discusses novel aspects and ideas in this domain.

The search for cleaner, cheaper, smaller and more efficient energy technologies has to a large extent been motivated by the development of new materials. The aim of this collection of articles is therefore to focus on what materials-based solutions can offer and show how the rationale design and improvement of their physical and chemical properties can lead to energy-production alternatives that have the potential to compete with existing technologies. In terms of alternative means to generate electricity that utilize renewable energy sources, the most dramatic breakthroughs for both mobile (i.e., transportation) and stationary applications are taking place in the fields of solar and fuel cells. And from an energy-storage perspective, exciting developments can be seen emerging from the fields of rechargeable batteries and hydrogen storage.

This special volume contains the proceedings of the 9th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily, from July 20 to 26, 2006. The workshop was the 9th in the Epioptics series and the 39th of the International School of Solid State Physics. The workshop was aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and at assessing the usefulness of these techniques for optimization of high-quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is dedicated to the theory of non-linear optics and to dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of scanning probe microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Sample Chapter(s). Longitudinal Gauge Theory of Surface Second Harmonic Generation (966 KB). Contents: Longitudinal Gauge Theory of Surface Second Harmonic Generation (B S Mendoza); Excited State Properties Calculations: From 0 to 3 Dimensional Systems (M Marsili et al.); High Spatial Resolution Raman Scattering for Nano-structures (E Speiser et al.); Vibrational Properties and the Miniband Effect in InGaAs/InP Superlattices (A D Rodrigues et al.); Electronic and Optical Properties of ZnO Between 3 and 32 eV (M Rakel et al.); Order and Clusters in Model Membranes: Detection and Characterization by Infrared Scanning Near-Field Microscopy (J Generosi et al.); Chemical and Magnetic Properties of NiO Thin Films Epitaxially Grown on Fe(001) (A Brambilla); Probing the Dispersion of Surface Phonons by Light Scattering (G Benedek & J P Toennies); and other papers. Readership: Researchers as well as graduate and postgraduate students in applied physics, specifically semiconductors and related areas, electron microscopy and condensed matter physics.

The book is aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and assessing the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Probe Microscopy to Material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Materials of special interest are silicon, semiconductor-metal interfaces, semiconductor and magnetic multi-layers and III-V compound semiconductors.

The book ?Channeling 2008?, Charged and Neutral Particles Channeling Phenomena, is formed by the same title conference contributions. This volume includes papers by leading researchers from different world centers. Their recent results on the coherent phenomena of charged and neutral particles propagating through the structures of various sizes and periodicities are included here, along with historical reviews by pioneers of coherent bremsstrahlung and channeling radiation as well as crystal channeling collimation.

The book is aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and assessing the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Probe Microscopy to Material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Materials of special interest are silicon, semiconductor-metal interfaces, semiconductor and magnetic multi-layers and III-V compound semiconductors.

The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.