Provides a basis for developing new standards to calculate the fire resistance of structural members, mostly in buildings. Considers building codes and techniques of fire protection, the behavior of fire in enclosed spaces and its effect on various building materials, and methods for calculating fir

Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.

Standard ASCE/SEI/SFPE 29-05 provides the most current and proven methods for calculating the fire resistance of selected structural members and barrier assemblies.

The core principles of structural firefighting are fire behavior, building construction, strategy, tactics, safety and training. Each core principle is examined with relevant on-the-job stories to bring lessons home. Fire departments must constantly train their firefighters and officers in these core principles if they want them to be safe and effective at structure fires. Training is the foundation of all the other core principles, and must be realistic, scenario-based, and hands-on. Never stop learning during your time as a structural firefighter. If you come to a point where you mistakenly believe that you know everything there is to know about fires in and around buildings–watch out–because you have just fallen into the complacency trap. FEATURES --Gain a deeper understanding of how firefighters should approach fires in buildings, with an emphasis on safety and effectiveness --See the latest research from UL and NIST on fire behavior and flow paths, with a discussion of best-practices and up-to-date tactical advice. --An essential, easy-to-read fundamental resource on how to safely and effectively fight fires in buildings of any size or type. “Fire Under Control is a riveting new book that allows you to learn while also seeing how street experiences coincide with printed tactical and scientific fire service information. I always have said that eyes, ears, and experience will equal your education in the fire service and Capt. Steve Bernocco has managed to bring it to light.” -- Lt. Mike Ciampo, Fire Department of New York

Tested techniques for designing fire-resistant structures Structural Fire Loads bridges the gap between prescriptive and performance-based methods for the design of fire-resistant buildings. The book streamlines complex computer analyses so that an approximate analytical expression can be easily used in structural fire load analysis and design. Simplified versions of energy, mass, and momentum equations are provided in dimensionless form with their solutions in tabular form. Step-by-step examples using standard structural systems, such as beams, trusses, frames, and arches, are also presented in this practical guide. Using the proven methods in this book, all types of fires can be addressed in the design process. Coverage includes: Overview of current practice Structural fire load and computer models Differential equations and assumptions Simplifications of differential equations Fire load and severity of fires Structural analysis and design

This Handbook is focused on structural resilience in the event of fire. It serves as a single point of reference for practicing structural and fire protection engineers on the topic of structural fire safety. It is also stands as a key point of reference for university students engaged with structural fire engineering.

The 1st edition of Structural Fire Fighting: Initial Strategy and Tactics is intended to provide fire personnel with the knowledge needed to deploy resources in the first 10 minutes of any structural fire incident. The manual is designed to help the reader develop a logical decision-making process for determining incident priorities, strategies, and tactics regardless of the available resources or configuration of the emergency services organization. Scenarios for residential, commercial, and special hazard incidents are included with recommended best practices and considerations. Training officers can use these scenarios, modified to local resources and realities, to develop classroom discussions or field simulations. This manual is a companion to Structural Fire Fighting: Truck Company Skills and Tactics, 2nd edition and the soon to be released Structural Fire Fighting: High Rise Fire Fighting. Each chapter of the manual contains learning objectives, key terms, and review questions to assist the reader in understanding the material.