This monograph presents the results of the theoretical analyses of stresses and displacements for shallow foundations subjected to various types of loads. In these analyses not only the classical models but more complex models of soils have been used, such as two-layer half-space, homogenous compressible layer of finite thickness, two-layer compressible layer of finite thickness, anisotropic compressible layer. Contact stresses, settlements, vertical stress distribution, bending moments and shear forces have been determined for foundations of any rigidity. Numerous values of the dimensionless coefficients "I" are tabulated, which can be of use in the solution of practical engineering problems.

The book offers a systematic analysis of footings (i.e. shallow foundations) in a realistic way, using constitutive relationships of the soil. The aim of the book is to deal with the theme holistically, involving the determination of the constitutive law of the soil, and then proportioning the footing occurring in different situations in actual practice. The book has eleven chapters. After giving an introduction and scope of the book in the first chapter, second and third chapters are respectively devoted to constitutive laws of soil and basic stress equations. In the third chapter analysis of strip footings subjected to central vertical load has been dealt. This analysis has been extended for eccentric –inclined load in the fifth chapter. Since problems of shallow foundations resting adjacent to a slope are of prime importance, this aspect has been dealt in sixth chapter. In the seventh chapter, analysis pertaining to square and rectangular footings have been presented. Effect of interference between adjacent footing is covered in chapter eight. Since ring footings are usually provided for tanks, silos, towers etc., ninth chapter is devoted to this. Added attraction of the book is its chapter ten in which footings located in seismic regions have been covered. Effect of embedment below the ground surface on the behavior of footings located both in non-seismic and seismic regions has been dealt in the chapter eleven. The book is intended for senior undergraduate, postgraduate and Ph.D. students of civil engineering, research scholars, practicing engineers, teachers and academicians. The analyses are based on the latest information available. A number of illustrated examples have been included in the text. SI units have been used in the book.

Analysis, Design and Construction of Foundations outlines methods for analysis and design of the construction of shallow and deep foundations with particular reference to case studies in Hong Kong and China, as well as a discussion of the methods used in other countries. It introduces the main approaches used by geotechnical and structural engineers, and the precautions required for planning, design and construction of foundation structures. Some computational methods and computer programmes are reviewed to provide tools for performing a more realistic analysis of foundation systems. The authors examine in depth the methods used for constructing shallow foundations, deep foundations, excavation and lateral support systems, slope stability analysis and construction, and ground monitoring for proper site management. Some new and innovative foundation construction methods are also introduced. It is illustrated with case studies of failures and defects from actual construction projects. Some advanced and modern theories are also covered in this book. This book is more targeted towards the understanding of the basic behavior and the actual construction of many geotechnical works, and this book is not dedicated to any design code or specification, though Euro codes and Hong Kong code are also used in this book for illustration. It is ideal for consulting geotechnical engineers, undergraduate and postgraduate students.

Shallow Foundations: Discussions and Problem Solving is written for civil engineers and all civil engineering students taking courses in soil mechanics and geotechnical engineering. It covers the analysis, design and application of shallow foundations, with a primary focus on the interface between the structural elements and underlying soil. Topics such as site investigation, foundation contact pressure and settlement, vertical stresses in soils due to foundation loads, settlements, and bearing capacity are all fully covered, and a chapter is devoted to the structural design of different types of shallow foundations. It provides essential data for the design of shallow foundations under normal circumstances, considering both the American (ACI) and the European (EN) Standard Building Code Requirements, with each chapter being a concise discussion of critical and practical aspects. Applications are highlighted through solving a relatively large number of realistic problems. A total of 180 problems, all with full solutions, consolidate understanding of the fundamental principles and illustrate the design and application of shallow foundations.

Ideal for undergraduates of geotechnical engineering for civil engineers, this established textbook sets out the basic theories of soil mechanics in a clear and straightforward way; combining both classical and critical state theories and giving students a good grounding in the subject which will last right through into a career as a geotechnical engineer. The subject is broken down into discrete topics which are presented in a series of short, focused chapters with clear and accessible text that develops from the purely theoretical to discussing practical applications. Soil behaviour is described by relatively simple equations with clear parameters while a number of worked examples and simple experimental demonstrations are included to illustrate the principles involved and aid reader understanding.

The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d

This report develops and calibrates procedures and modifies the AASHTO LRFD Bridge Design Specifications, Section 10-Foundations for the Strength Limit State Design of Shallow Foundations. The material in this report will be of immediate interest to bridge engineers and geotechnical engineers involved in the design of shallow foundations.