The solar Photovoltaic (PV) technology is gaining significant levels and is going to contribute a major share of total generated electricity in the coming years. PV technology is becoming a promising alternative source for fossil fuels. However, Power Quality (PQ) is the major concern that occurs between the grid and an end user. Any typical electrical distribution system exhibits a passive characteristic with respect to power flows when power flows from a substation to load. However, with inclusion of solar PV generators, this behaviour tends to be changed. The main characteristics related to PQ, such as voltage level, frequency, power factor and Total Harmonic Distortion (THD), may be affected. This book presents the analysis of PQ with the integration of grid-connected PV systems as distributed generation. The role of Maximum Power Point Tracking (MPPT) technique is investigated through implementing few basic MPPT techniques. Using the Matlab-simulation platform, the analysis of PQ is demonstrated. This analysis is based on real measurements of THD, Voltage levels, Current levels, DC voltage levels, real power and reactive power flows.

The solar Photovoltaic (PV) technology is gaining significant levels and is going to contribute a major share of total generated electricity in the coming years. PV technology is becoming a promising alternative source for fossil fuels. However, Power Quality (PQ) is the major concern that occurs between the grid and an end user. Any typical electrical distribution system exhibits a passive characteristic with respect to power flows when power flows from a substation to load. However, with inclusion of solar PV generators, this behaviour tends to be changed. The main characteristics related to PQ, such as voltage level, frequency, power factor and Total Harmonic Distortion (THD), may be affected. This book presents the analysis of PQ with the integration of grid-connected PV systems as distributed generation. The role of Maximum Power Point Tracking (MPPT) technique is investigated through implementing few basic MPPT techniques. Using the Matlab-simulation platform, the analysis of PQ is demonstrated. This analysis is based on real measurements of THD, Voltage levels, Current levels, DC voltage levels, real power and reactive power flows.

Residential Microgrids and Rural Electrifications contains an overview of microgrids' architecture, load assessments, designing of microgrids for residential systems, and rural electrifications to help readers understand the fundamentals. Including many new topics in the field of home automation and the application of IoT for microgrids monitoring and control, the book includes sections on the infrastructure necessary for charging Electric Vehicles in residential systems and rural electrifications and how to estimate the energy and cost of various combinations of energy resources. Many examples and practical case studies are included to enhance and reinforce learning objective goals. Those in engineering research and technical professions will be able to perform energy and cost analyses of various combinations of energy sources by using advanced, real simulation tools. - Features methods for adopting and applying artificial intelligent techniques in microgrids for improving reliability - Addresses the role of battery energy storage systems, the reliable operation of microgrids, international standards such as IEC and IEEE standards, and safe handling techniques - Covers IoT for the monitoring and control of microgrids and the adoption of recent technologies

This book presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD 2022) focusing on the recent advances and best practices of mechanical engineering, related technologies and sciences to meet the challenges in mechanical engineering, digital technology and smart manufacturing. The contents focus on design engineering, advanced materials, automation in engineering, industrial and systems engineering, energy and others. Some of the topics discussed here include fracture and failure analysis, fuels and alternative fuels, non-conventional machining, combustion and IC engines, advanced manufacturing technologies, powder metallurgy and rapid prototyping, industrial engineering and automation, supply chain management, design of mechanical systems, vibrations and control engineering, automobile engineering, performance analysis of biomass energy systems, heat transfer, composite materials, thermal modelling and simulations of different systems, analysis of slurry pipeline systems, waste management, optimization and robotics. The wide range of topics presented in this book will be useful for beginners, researchers as well as professionals in mechanical engineering.

Modeling of PHOTOVOLTAIC SYSTEMS Using MATLAB® Provides simplified MATLAB® codes for analysis of photovoltaic systems, describes the model of the whole photovoltaic power system, and shows readers how to build these models line by line. This book presents simplified coded models for photovoltaic (PV)-based systems using MATLAB® to help readers understand the dynamic behavior of these systems. Through the use of MATLAB®, the reader has the ability to modify system configuration, parameters, and optimization criteria. Topics covered include energy sources, storage, and power electronic devices. The book contains six chapters that cover systems’ components from the solar source to the end user. Chapter 1 discusses modeling of the solar source, and Chapter 2 discusses modeling of the PV source. Chapter 3 focuses on modeling of PV systems’ power electronic features and auxiliary power sources. Modeling of PV systems’ energy flow is examined in Chapter 4, while Chapter 5 discusses PV systems in electrical power systems. Chapter 6 presents an application of PV system models in systems’ size optimization. Common control methodologies applied to these systems are also modeled in this book. Covers the basic models of the whole PV power system, enabling the reader modify the models to provide different sizing and control methodologies Examines auxiliary components to PV systems, including wind turbines, diesel generators, and pumps Contains examples, drills, and codes Modeling of Photovoltaic Systems Using MATLAB®: Simplified Green Codes is a reference for researchers, students, and engineers who work in the field of renewable energy, and specifically in PV systems.

Comprehensive Energy Systems, Seven Volume Set provides a unified source of information covering the entire spectrum of energy, one of the most significant issues humanity has to face. This comprehensive book describes traditional and novel energy systems, from single generation to multi-generation, also covering theory and applications. In addition, it also presents high-level coverage on energy policies, strategies, environmental impacts and sustainable development. No other published work covers such breadth of topics in similar depth. High-level sections include Energy Fundamentals, Energy Materials, Energy Production, Energy Conversion, and Energy Management. Offers the most comprehensive resource available on the topic of energy systems Presents an authoritative resource authored and edited by leading experts in the field Consolidates information currently scattered in publications from different research fields (engineering as well as physics, chemistry, environmental sciences and economics), thus ensuring a common standard and language

Today, the tide has turned so strongly in favour of renewables that for the first time since the dawn of the fossil fuel era over two hundred years ago renewable energy technologies have started attracting more investment globally than that in the fossil fuel-based technologies. This text provides a comprehensive and wide ranging introduction to various renewable energy technologies and their applications, such as solar, wind, biomass, biogas, wave, geothermal, tidal and small hydel. It provides a thorough understanding of the basic energy conversion processes taking place in various renewable energy-based equipment like heat engines, photovoltaics, wind turbines, windmills, wave machines, and so on. The text also deals with the impact of renewable energy sources on global warming and pollution. The book is intended for courses in Environmental Sciences, Environmental/Electrical/Mechanical Engineering and Energy Studies at the undergraduate and postgraduate levels. It will also serve as a useful reference for scientists, technocrats and environmentalists.