Soils are the most common and complex type of construction material. Virtually all structures are either built with soil (e.g., earth dams and embankments), in soil (e.g., tunnels and underground storage facilities), or on soil (e.g., building foundations and roads). Soil conditions and load combinations are unique to each site. To be able to predict soil behavior under the anticipated loading conditions, the mechanics of soils should be well understood, and their specific properties evaluated. The project design should also take into consideration the environmental, social, and economic factors. The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 1 contains chapters 1 through 7, which provides the user with a practical guide on the fundamentals of soil mechanics, including: Natural Soil Deposits, Soil Composition and Properties, Soil Improvement, Soil Water, Soil Stresses, Soil Compressibility and Settlement, and Shear Strength of Soil. Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided. It also contains the necessary forms, tables, and graphing papers for the state-of-the-practice laboratory experiments in soil mechanics.

This excellent handbook combines four technical manuals covering Site Investigations, Laboratory Testing of Soils and basic Soils Engineering applicable to the Planning, Design and Construction of Pile Foundations and other major Civil Structures. Our manual reviews the various methods of conducting site investigations and laboratory and field testing, preliminary to project design. Covering the basics of soils identification procedures and goes on to settlement behavior, seepage, slope stability and other important subjects. Detailing some more difficult technical subjects including seismic activity and vibrations to some of the modern solutions for soils stabilization such as vibro-flotation and cement or chemical grouting methods.

A selection of papers by Professor AW Skempton, aiming to show his breadth of achievement in the field of soilmechanics. The chosen papers are reproduced chronologically, most of them falling into three subject groups: soil properties, stability of slopes, and foundations. This collection is useful to engineers, research workers, and students.

These volumes contain the contributions to the Second European Conference on Unsaturated Soils, E-UNSAT 2012, held in Napoli, Italy, in June 2012. The event is the second of a series of European conferences, and follows the first successful one, organised in Durham, UK, in 2008. The conference series is supported by Technical Committee 106 of the International Society of Soil Mechanics and Geotechnical Engineering on Unsaturated Soils. The published contributions were selected after a careful peer-review process. A collection of more than one hundred papers is included, addressing the three thematic areas experimental, including advances in testing techniques and soil behaviour, modelling, covering theoretical and constitutive issues together with numerical and physical modelling, and engineering, focusing on approaches, case histories and geo-environmental themes. The areas of application of the papers embrace most of the geotechnical problems related to unsaturated soils. Increasing interest in geo-environmental problems, including chemical coupling, marks new perspectives in unsaturated soil mechanics. This book will provide a valuable up-to-date reference across the subject for both researchers and practitioners.

The Penetrometer and Soil Exploration: Interpretation of Penetration Diagrams—Theory presents the many uses of the penetrometer for investigating soil conditions. Testing methods include the following: (1) in situ load tests on full-scale foundations; (2) laboratory testing of undisturbed samples, and (3) in situ testing of soils. The book regards the advantages of using the penetrometer as a handy tool in drilling and sampling. The text emphasizes that the investigator should never rely entirely on the analogy or the extrapolation of information pertaining to a nearby site. The text describes the different shapes of the penetrometer diagrams obtained from tests in homogeneous cohesionless soil, as well as the significance of the embedment of a pile into the bearing stratum for deep foundation designs. The paper discusses the De Beer theory, Kerisel's theory, and the theory developed at the Delft Laboratory of Soil Mechanics. The laboratory determines the maximum soil pressure and the corresponding embedment of the pile. According to Professor L'Herminier, "the bearing capacity of a pile may be determined...from laboratory tests on soil samples, the other by extrapolating penetrometer data." The book is suitable for structural engineers, civil engineers, geologists, architects, and students of soil mechanics.

A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

The 9th edition maintains the content on all soil mechanics subject areas - groundwater flow, soil physical properties, stresses, shear strength, consolidation and settlement, slope stability, retaining walls, shallow and deep foundations, highways, site investigation - but has been expanded to include a detailed explanation of how to use Eurocode 7 for geotechnical design. The key change in this new edition is the expansion of the content covering Geotechnical Design to Eurocode 7. Redundant material relating to the now defunct British Standards - no longer referred to in degree teaching - has been removed. Building on the success of the earlier editions, this 9th edition of Smith’s Elements of Soil Mechanics brings additional material on geotechnical design to Eurocode 7 in an understandable format. Many worked examples are included to illustrate the processes for performing design to this European standard. Significant updates throughout the book have been made to reflect other developments in procedures and practices in the construction and site investigation industries. More worked examples and many new figures have been provided throughout. The illustrations have been improved and the new design and layout of the pages give a lift. unique content to illustrate the use of Eurocode 7 with essential guidance on how to use the now fully published code clear content and well-organised structure takes complicated theories and processes and presents them in easy-to-understand formats book's website offers examples and downloads to further understanding of the use of Eurocode 7 www.wiley.com/go/smith/soil