Tests in level ice on an idealized icebreaker bow in the shape of a simple wedge were conducted in the test basin. The horizontal and vertical forces on the wedge were measured, and floe size distribution in the wake of the wedge was observed. From the force measurements, the ice wedge/hull friction factor was calculated and found to be in general agreement with the friction factor measured in separate friction tests. The ice floe length and ice floe area measured in the current study were found to follow log-normal probability distributions defined by the length average L and area average A and corresponding standard deviations S sub L and S sub A. The results of these tests and other tests conducted at another facility showed that the ratios A/h squared and L/h (A = average floe area, L = average floe length, h = ice thickness) were, for the same type of model ice, directly proportional to the parameter sigma/gamma h (sigma = ice bending strength, gamma = specific weight of water) and sigma/gamma h, respectively, and independent of the velocity and ice strain modulus or ice characteristic length. However, the coefficients of proportionality appear to depend upon the type of model ice used in the tests. The ratios S-sub-L/A were independent of sigma/gamma h but varied with the bow shape and the type of ice. The available field data are not sufficient for meaningful comparison with the laboratory results. (Author).

There is an increasing need to construct engineering structures in the Arctic sea. The requirement is principally generated by the oil and gas industry, because of the substantial reserves that are known to existing offshore in the Beaufort Sea, the Caspian Sea, the Barents Sea, the Pacific Ocean off the cost of Sakhalin, the Canadian Arctic, and almost certainly elsewhere. Structures have to withstand the severe environmental forces generated by sea ice, a subject that is developing rapidly but is still far from completely understood. Underwater pipelines have to be safe against ice gouging and strudel scour, but also have to be constructed safely and economically. The social and human environment has to be understood and respected. This important book intentionally takes a broad view, and vividly accounts for the many and often subtle interactions between the different factors. It is illustrated by case studies of actual projects.

IUTAM-IAHR Symposium on Ice-Structure Interaction Professor Bez Tabarrok, Chairman of the Canadian National Committee (CNC) of the International Union of Theoretical and Applied Mechanics (IUTAM) invited Professor Derek Muggeridge to organize a symposium on ice structure interaction. Dr. Muggeridge readily agreed and prepared a proposal that was endorsed by the CNC and presented to the General Assembly Meeting of IUTAM for their consideration. This Assembly gave its approval and provided the local organizing committee with the names of individuals who were willing to serve on the Scientific Committee. Dr. Muggeridge became chairman of this committee and Dr. Ian Jordaan became co-chairman of this committee as well as chairman of the local organizing committee. The symposium followed the very successful previous meeting, chaired by Professor P. Tryde in Copenhagen, by ten years. Both symposia uti lized Springer-Verlag to publish their proceedings. The Faculty of En gineering and Applied Science at Memorial University of Newfoundland were particul{lXly pleased to host this prestigious symposium as it marked the twentieth anniversary of its Ocean Engineering Research Centre.

Marine Rudders and Control Surfaces guides naval architects from the first principles of the physics of control surface operation, to the use of experimental and empirical data and applied computational fluid dynamic modelling of rudders and control surfaces.The empirical and theoretical methods applied to control surface design are described in depth and their use explained through application to particular cases. The design procedures are complemented with a number of worked practical examples of rudder and control surface design.• The only text dedicated to marine control surface design• Provides experimental, theoretical and applied design information valuable for practising engineers, designers and students• Accompanied by an online extensive experimental database together with software for theoreticalpredictions and design development