This book investigates the various aspects of shape optimization of two dimensional continuum structures, including shape design sensitivity analysis, structural analysis using the boundary element method (BEM), and shape optimization implementation. The book begins by reviewing the developments of shape optimization, followed by the presentation of the mathematical programming methods for solving optimization problems. The basic theory of the BEM is presented which will be employed later on as the numerical tool to provide the structural responses and the shape design sensitivities. The key issue of shape optimization, the shape design sensitivity analy sis, is fully investigated. A general formulation of stress sensitivity using the continuum approach is presented. The difficulty of the modelling of the ad joint problem is studied, and two approaches are presented for the modelling of the adjoint problem. The first approach uses distributed loads to smooth the concentrated adjoint loads, and the second approach employs the singu larity subtraction method to remove the singular boundary displacements and tractions from the BEM equation. A novel finite difference based approach to shape design sensitivity is pre sented, which overcomes the two drawbacks of the conventional finite difference method. This approach has the advantage of being simple in concept, and eas ier implementation. A shape optimization program for two-dimensional continuum structures is developed, including structural analysis using the BEM, shape design sensitiv ity analysis, mathematical programming, and the design boundary modelling.

The book is organized into four chapters. The first three treat distinct types of design variables, and the fourth presents a built-up structure formulation that combines the other three. The first chapter treats finite-dimensional problems, in which the state variable is a finite-dimensional vector of structure displacements and the design parameters. The structual state equations are matrix equations for static response, vibration, and buckling of structures and matrix differential equations for transient dynamic response of structures, which design variables appearing in the coefficient matrices.

This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.

This book contains the edited versions of the papers presented at the Second International Workshop on Electric and Magnetic Fields held at the Katholieke Universiteit van Leuven (Belgium) in May 1994. This Workshop deals with numerical solutions of electromagnetic problems in real life applications. The topics include coupled problems (thermal, mechanical, electric circuits), CAD & CAM applications, 3D eddy current and high frequency problems, optimisation and application oriented numerical problems. This workshop was organised jointly by the AIM (Association of Engineers graduated from de Montefiore Electrical Institute) together with the Departments of Electrical Engineering of the Katholieke Universiteit van Leuven (Prof. R. Belmans), the University of Gent (Prof. J. Melkebbek) and the University of Liege (Prof. W. Legros). These laboratories are working together in the framework of the Pole d'Attraction Interuniversitaire - Inter-University Attractie-Pole 51 - on electromagnetic systems led by the University of Liege and the research work they perform covers most of the topics of the Workshop. One of the principal aims of this Workshop was to provide a bridge between the electromagnetic device designers, mainly industrialists, and the electromagnetic field computation developers. Therefore, this book contains a continuous spectrum of papers from application of electromagnetic models in industrial design to presentation of new theoretical developments.

This volume presents and discusses recent advances in boundary element methods and their solid mechanics applications. It illustrates these methods in their latest forms, developed during the last five to ten years, and demonstrates their advantages in solving a wide range of solid mechanics problems.

Extensive numerical methods for computing design sensitivity are included in the text for practical application and software development. The numerical method allows integration of CAD-FEA-DSA software tools, so that design optimization can be carried out using CAD geometric models instead of FEA models. This capability allows integration of CAD-CAE-CAM so that optimized designs can be manufactured effectively.

Since its origin in 1978, the International Conference on Boundary Element Methods has provided the recognized and established forum for innovations in boundary element research. Practically all new ideas on boundary ele ments have been presented at these conferences and the resulting papers can be found in the published books. The conference brings together the most renowned scientists and engineers working on boundary element research throughout the world. A unique feature of these meetings is that the participation of younger researchers is actively encouraged by the organizers in an effort to .bring forward to the attention of the international community an ever expanding range of new ideas. This book contains the edited version of the papers presented at the XIIIth BEM Conference held in Tulsa, Oklahoma in August of 1991. The meeting attracted a large number of participants and many excellent contributions which have been divided into nineteen different sections, i.e. Potential Prob lems; Diffusion and Convection Problems; Fluid Mechanics; Fluid Flow; Wave Propagation; Groundwater Flow; Heat Transfer; Electrical Problems; Geomechanics; Plates and Shells; Inelastic Problems; Damage Tolerance; Contact Mechanics; Industrial Applications; Design Sensitivity and Opti mization; Inverse Problems; Special Techniques; Numerical Aspects and Computational Aspects.