In this book, the global sequential scenario of bifurcation trees of periodic motions to chaos in nonlinear dynamical systems is presented for a better understanding of global behaviors and motion transitions for one periodic motion to another one. A 1-dimensional (1-D), time-delayed, nonlinear dynamical system is considered as an example to show how to determine the global sequential scenarios of the bifurcation trees of periodic motions to chaos. All stable and unstable periodic motions on the bifurcation trees can be determined. Especially, the unstable periodic motions on the bifurcation trees cannot be achieved from the traditional analytical methods, and such unstable periodic motions and chaos can be obtained through a specific control strategy. The sequential periodic motions in such a 1-D time-delayed system are achieved semi-analytically, and the corresponding stability and bifurcations are determined by eigenvalue analysis. Each bifurcation tree of a specific periodic motion to chaos are presented in detail. The bifurcation tree appearance and vanishing are determined by the saddle-node bifurcation, and the cascaded period-doubled periodic solutions are determined by the period-doubling bifurcation. From finite Fourier series, harmonic amplitude and harmonic phases for periodic motions on the global bifurcation tree are obtained for frequency analysis. Numerical illustrations of periodic motions are given for complex periodic motions in global bifurcation trees. The rich dynamics of the 1-D, delayed, nonlinear dynamical system is presented. Such global sequential periodic motions to chaos exist in nonlinear dynamical systems. The frequency-amplitude analysis can be used for re-construction of analytical expression of periodic motions, which can be used for motion control in dynamical systems.

The book is about the global stability and bifurcation of equilibriums in polynomial functional systems. Appearing and switching bifurcations of simple and higher-order equilibriums in the polynomial functional systems are discussed, and such bifurcations of equilibriums are not only for simple equilibriums but for higher-order equilibriums. The third-order sink and source bifurcations for simple equilibriums are presented in the polynomial functional systems. The third-order sink and source switching bifurcations for saddle and nodes are also presented, and the fourth-order upper-saddle and lower-saddle switching and appearing bifurcations are presented for two second-order upper-saddles and two second-order lower-saddles, respectively. In general, the (2 + 1)th-order sink and source switching bifurcations for (2)th-order saddles and (2 +1)-order nodes are also presented, and the (2)th-order upper-saddle and lower-saddle switching and appearing bifurcations are presented for (2)th-order upper-saddles and (2)th-order lower-saddles (, = 1,2,...). The vector fields in nonlinear dynamical systems are polynomial functional. Complex dynamical systems can be constructed with polynomial algebraic structures, and the corresponding singularity and motion complexity can be easily determined.

Cold atmospheric plasma (CAP) is a promising and rapidly emerging technology for a wide range of applications, from daily life to industry. CAP’s key advantage is its unique ability to effectively deliver reactive species to subjects including biological materials, liquid media, aerosols, and manufactured surfaces. This book assesses the state-of-art in CAP research and implementation for applications including agriculture, medicine, environment, materials, catalysis, and energy. The mechanisms of generation and transport of the key reactive species in the plasma are introduced and examined in the context of their applications. Opportunities and challenges for novel technologies, fresh ideas/concepts, expanded multidisciplinary study, and new applications are discussed. The authors’ vision for the converging trends across diverse disciplines is proposed to stimulate critical discussions, research directions, and collaborations.

The use of sensors and instrumentation for measuring and control is growing at a very rapid rate in all facets of life in today's world. This Part II of Instrumentation: Theory and Practice is designed to provide the reader with essential knowledge regarding a broad spectrum of sensors and transducers and their applications. This textbook is intended for use as an introductory one-semester course at the junior level of an undergraduate program. It is also very relevant for technicians, engineers, and researchers who had no formal training in instrumentation and wish to engage in experimental measurements. The prerequisites are: a basic knowledge of multivariable calculus, introductory physics, college algebra, and a familiarity with basic electrical circuits and components. This book emphasizes the use of simplified electrical circuits to convert the change in the measured physical variable into a voltage output signal. In each chapter, relevant sensors and their operation are presented and discussed at a fundamental level and are integrated with the essential mathematical theory in a simplified form. The book is richly illustrated with colored figures and images. End-of-chapter examples and problems complement the text in a simple and straight forward manner.

This book describes the Asymptotic Modal Analysis (AMA) method to predict the high-frequency vibroacoustic response of structural and acoustical systems. The AMA method is based on taking the asymptotic limit of Classical Modal Analysis (CMA) as the number of modes in the structural system or acoustical system becomes large in a certain frequency bandwidth. While CMA requires both the computation of individual modes and a modal summation, AMA evaluates the averaged modal response only at a center frequency of the bandwidth and does not sum the individual contributions from each mode to obtain a final result. It is similar to Statistical Energy Analysis (SEA) in this respect. However, while SEA is limited to obtaining spatial averages or mean values (as it is a statistical method), AMA is derived systematically from CMA and can provide spatial information as well as estimates of the accuracy of the solution for a particular number of modes. A principal goal is to present the state-of-the-art of AMA and suggest where further developments may be possible. A short review of the CMA method as applied to structural and acoustical systems subjected to random excitation is first presented. Then the development of AMA is presented for an individual structural system and an individual acoustic cavity system, as well as a combined structural-acoustic system. The extension of AMA for treating coupled or multi-component systems is then described, followed by its application to nonlinear systems. Finally, the AMA method is summarized and potential further developments are discussed.

The vapor compression cycle (VCC) underpins the vast majority of refrigeration systems throughout the world. Most undergraduate thermodynamics courses cover the VCC, albeit in a cursory fashion. This book is designed to offer an in-depth look at the analysis, design and operation of large-scale industrial ammonia-based refrigeration systems. An important feature of this work is a treatment of computer-aided analysis using CoolProp, an open source resource for evaluating thermodynamic properties. CoolProp can be incorporated into a large number of common computational platforms including Microsfot Excel, Python, and Matlab, all of which are covered in this book.

The vapor compression cycle (VCC) underpins the vast majority of refrigeration systems throughout the world. Most undergraduate thermodynamics courses cover the VCC, albeit in a cursory fashion. This book is designed to offer an in-depth look at the analysis, design and operation of large-scale industrial ammonia-based refrigeration systems. An important feature of this work is a treatment of computer-aided analysis using CoolProp, an open source resource for evaluating thermodynamic properties. CoolProp can be incorporated into a large number of common computational platforms including Microsfot Excel, Python, and Matlab, all of which are covered in this book.